請問版上有人入手這台嗎?
使用起來如何呢?
Never take life seriously. Nobody gets out alive anyway.
2021-04-16 1:55 發佈
搶不到niche退而找替代方案
剛好看到這台低殘粉、italmill 64mm刀盤
原本要從indiegogo集運購買
後來發現台灣已經有代理商了
以這價位的磨豆機來說cp值很高
國外論壇討論度也不少
目前看到有的問題大概
刻度標記、爆米花效應、飛粉、刀盤室留殘粉
可參考這篇：
https://antoinevautherot.medium.com/g-iota-df64-solo-turin-review-d64e61b8fa4
darrenho wrote:
與Niche Zero比較一下口感與風味
想問一下Ｄ大，近期使用後有沒有什麼優缺可以分享的呢？謝謝
有看到把64跟Niche 拆解分屍...
https://www.youtube.com/watch?v=SjIXgt1_CxE
-
*I've only had my DF64 for less than 2 weeks. No significant amounts of coffee beans (< 2 lbs) has gone thru it yet. (i.e. not fully break in yet.)
**I've had my Niche Zero (NZ) for about a year.
I was trying to pull shots comparing the taste between DF64 and NZ using the same bean (L-M roasts), same weight (18g) and same espresso machine aiming 36g out in 30 secs (counting from 1st drip of coffee to finish).
- The grounds: The grounds of NZ seemed puffer than the DF64. (The amounts of grounds in the portafilter were a bit more than the DF64.) This was also noticed when doing distribution in the portafilter using my distribution tool. I know it can not be directly compared like this, but, my goal was to achieve the same output weight in the same (or close) time (seconds).
- Clumping: Little to none. No RDT needed in my case.
- The taste (early impressions): The taste from DF64 was not very impressive initially, with a bit of sour and bitter taste; while the NZ was more mouthful with a good/rich body, and the after taste was a bit sweeter.
Just wanted to share my personal experience with the DF64 so far. Will continue to break in the grinder and do the taste comparison with my NZ.
Cheers.
-
bhyoung wrote:
想問一下Ｄ大，近期使(恕刪)
Never take life seriously. Nobody gets out alive anyway.
darrenho wrote:
Copied and pasted what I posted on Home-Barista:
-
*I've only had my DF64 for less than 2 weeks. No significant amounts of coffee beans (< 2 lbs) has gone thru it yet. (i.e. not fully break in yet.)
**I've had my Niche Zero (NZ) for about a year.
I was trying to pull shots comparing the taste between DF64 and NZ using the same bean (L-M roasts), same weight (18g) and same espresso machine aiming 36g out in 30 secs (counting from 1st drip of coffee to finish).
- The grounds: The grounds of NZ seemed puffer than the DF64. (The amounts of grounds in the portafilter were a bit more than the DF64.) This was also noticed when doing distribution in the portafilter using my distribution tool. I know it can not be directly compared like this, but, my goal was to achieve the same output weight in the same (or close) time (seconds).
- Clumping: Little to none. No RDT needed in my case.
- The taste (early impressions): The taste from DF64 was not very impressive initially, with a bit of sour and bitter taste; while the NZ was more mouthful with a good/rich body, and the after taste was a bit sweeter.
Just wanted to share my personal experience with the DF64 so far. Will continue to break in the grinder and do the taste comparison with my NZ.
Cheers.
我可以解讀為無論使用或沖煮風味Niche樂勝嗎?
-
I've been comparing the tastes between my DF64 and NZ using the same beans since I got the DF64 (mid. April).
DF64: Getting a little more balanced than the first week. Body was more rounded.
NZ: Produced a little bitter, sour yet prominent mid-body.
-
DF64整體口感比較平順
NZ在中段的澀與酸味比較明顯
*味覺是主觀的
jackson.cheng wrote:
我可以解讀為無論使用(恕刪)
Never take life seriously. Nobody gets out alive anyway.
內文搜尋
從 APP 打開
X