• 5

Power8 workshop

2012-09-19 18:30 發佈
文章關鍵字 Power8 workshop

網路上查到的價格:

商品原價$399.00 USD
約合台幣: 12322元

亞馬遜售價: $324.17 USD
約合台幣: 10011元


設計上是不錯,不過品質與精緻度令人不太有信心,多找奌評價看看比較好
做"勞作"應該OK吧!!

你沒看見他鋸木板碰到"木節"就差點過不去了嗎??(要推兩次!!)

一開始電池很沒力!!(聽聲音就知道!!)
所以經過多次剪接!!

天知道一顆電池能鋸"幾"片木板???

當你木板越大,越需要"大"的桌子,不然你的鋸台會被推著跑!!

所以我一開始才說這是做"勞作"的!!

XD
裝在箱子裡的,是接上外部電源的cable
於箱子外另有一條插頭,這是外部電源的來源

整體而言,適合製作小物

vil wrote:
整體而言,適合製作小物...(恕刪)


確實是如此, 我覺得如果要拿來做勞作還可以, 如果要做傢具,
這種玩具是應付不了的, 實在不建議.
我倒覺得這產品很不錯....畢竟不是每個人的家都這麼大
想要團購的話,算我一份
這機型現在已經有ws3的樣子
跟ws1好像只差電池
上面有大大說"你沒看見他鋸木板碰到"木節"就差點過不去了嗎??(要推兩次!!)"
我個人認為那是因為沒用輔助器,怕手去切到才會這樣.....

sonkosan wrote:
上面有大大說"你沒看見他鋸木板碰到"木節"就差點過不去了嗎??(要推兩次!!)"
我個人認為那是因為沒用輔助器,怕手去切到才會這樣........(恕刪)


想買的人還是先弄清處比較好, 以這樣的設計最好先假設它以精簡為訴求, 效果較次等,
太小的鋸片本身就會帶來很多限制, 而且我總覺得扭力可能比較不足,
會切得不夠漂亮, 厚一點的板子不知道有沒有辦法對付.
amazon上有一些評價, 雖然用家還不多, 但似乎不算好, 只有三顆半星
有個用家的評價, 看來真的是只有薄的松板可以鋸得動:

Pros
--- This truly is a clever design for portability, lightweight and compactness. It is small enough to fit in a small trunk or in the corner of a crowded apartment. (Though I am not sure what kind of renovations you might be doing in a crowded rental property)
--- It has sufficient safety features to protect a moderately careful amateur, and that's good, because i can only imagine amateurs using this.

Cons
---None of the individual tools are ANY good. In fact these may be the cheapest imported toys I have EVER seen. Even the light is crummy, and I don't count the light as a "tool" unless it's dark.
--- All of the mounting mechanisms are sloppy. The "table saw" is held in place loosely and slips back and forth, canceling any possibility for accurate cuts. The hooks that hold the "drill press" in place wobbles.
--- The "fence" of the "table-saw" attaches firmly at both ends, but is hard to move and nearly impossible to square.
--- The "drill press" lever-arm sticks and binds. The post is weak and prone to twisting. Its action is loose and sloppy, even with only light pressure in softwood.
---The circ-saw is too small and underpowered. Its bearings are junk, noisy, plastic that could not possibly last long. The stamped-metal baseplate is out-of-square, thin and weak. My was bent right out of the box.
---The jig-saw is even worse than my son-in-law's B&D clone that cost $18 dollars. The blade moves up and down, but also wobbles left and right, with almost no cutting power even with a freshly-charged battery and a good blade.
---The Bag is a nuisance to pack. (Especially if you try to pack everything the way it came so you can return it)
--- The box is brittle thin plastic that would easily shatter if dropped or pounded on as shown in videos. I doubt the thin Polypropylene latches would last either.
---None of the motors have enough power to cut anything except thin soft pine.
---The drill has a nice handle, but bogs down when you press into wood or even soft metal, like aluminum.
---The blades that come with the saws are ultra cheapo, not sharp, and get duller quickly.
---Batteries do not charge in one hour as stated in the manual and advertisements. Even if they did, they don't last long.
---The manual is terrible; one of those poorly-translated, "Gee-wiz! Look at all these groovy things this swiss army-knife will do! Congratulations on your most wise purchase" kind of manuals.
---The price is ridiculous for this level of "quality." You can get MUCH better quality tool-sets for this money at almost any home-store, or even Wal Mart. It would be no bargain at half the price.


個人也是覺得這東西做模型類的小型作品還ok,如果要切大型木板的話,機器可能不夠力,且易過熱,也無法長時間的連續運轉。
但對於只做小型作品,且家中空間有限的人,應該是滿好的選擇。
  • 5
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?