看了XDA但因為英文實在我不夠認識他
有沒有懂刷機的朋友能解答
我大概理解是
1.我需要先解鎖(這個我會了)要開USB調試
2.進FASTBOOT要刷入BY~XM版本的recovery
3.下載supersu root卡刷包用rec刷入得到ROOT
接下來我想刷他講了一堆我實在不太懂
有沒有高手能幫忙說明或者私訊給我下面我該怎麼做
ViPER|Audio™ || ViPER|Atmos™
ViPER|DD+™
Stock | Sony™ | Beats™
Features:
Compatible with DIRAC AUDIO
The latest ViPER4Android 2.4.0.1 apk
Works in Permissive and Enforcing Selinux
Works with no root as long as a Permissive kernel is installed
Installed in /system/priv-app
Preinstalled 2.4.0.1 Driver
Sony™ and Beats™ libraries and effects (No apk's or settings to look for!)
Library & Effect entries in /system/etc/audio_effects.conf, /system/vendor/etc/audio_effects.conf, /vendor/etc/audio_effects.conf, and /system/etc/htc_audio_effects.conf
Deep Buffer removal from /system/etc/audio_policy.conf
Backup script to survive rom updates
!! Make sure /system has 50mb+ of available free space !!
!! If it is necessary for you to run Cyanogenmod 13 with its own SuperUser you must change Selinux from Enforcing Strict to Permissive as SuperSU is required for processing in Enforcing !!
Installation:
Boot to recovery
Wipe > Advanced > Dalvik Cache, Cache
Install > ViPER|Audio™ OR ViPER|Atmos™ OR ViPER|DD+™
Reboot
Open v4a
Menu > Show Notification (block if desired by long pressing notification)
Menu > UI Setting > Expert
Menu > Save Effect Profile > New Effect Profile > "Stock" (this will help you find your working v4a directory)
Begin playing audio file
Open v4a
Uncheck Enable v4a
Check Enable v4a
It is possible your /system is dirty enough to require at least a System wipe in TWRP and a dirty flash of your current rom before flashing ViPER|Audio™ if you experience any Force Closes or any other signs of an incomplete/failed installation.
!! Do NOT delete /system/priv-app/MusicFX !!
In initial testing I found that I had to move MusicFX back to get ViPER working and I haven't removed it since. I do disable it and recommend doing the same if it's not working "out of the box".
!! Audiophile™ Profile zip is NOT flashable !!
Extract both folders in zip into the following two directories:
Code:
/data/media/legacy/ViPER4Android
and
Code:
/storage/emulated/0/ViPER4Android
!! ViPER|Audio™ Super Quality Driver zip is not needed when using any ViPER package !!
I've included this zip only for those using a ViPER4Android installation from any place but here and experience a persistent install driver prompt. Most likely to benefit would be those with a vendor partition that other ViPER4Android installations aren't able to patch /vendor/etc/audio_effects.conf.
Again, those using any ViPER package do not need this. If you experience a persistent install driver prompt after flashing any ViPER package, this will not help you as your issue is likely insufficient free space in /system or something outside the scope of what this zip contains.
Uninstallation and Removal:
The best and easiest way to remove this and any other /system mod from your device is to dirty flash your rom after wiping System in TWRP. Before you begin, make sure you have a compatible rom zip on your internal storage as an OS will need to be installed. As long as you do not Factory Reset or check Data or Internal Storage, your data will be left intact but with a fresh /system partition.
Verify compatible rom zip is on device
Boot to recovery
Wipe > Advanced > System, Dalvik Cache, Cache
Mount > uncheck System
Install > current/compatible rom zip
Reboot
Audiophile™ ViPER|Audio™ Active Settings
ViPER4Android™ > Enabled
ExtremeBeats™ Perfection EQ Preset > 3.5, 4.5, 5.0, 3.5, 1.5, 1.0, 3.5, 4.5, 5.0, 3.5 (Enabled when needed)
Convolver > Enabled
Impulse Response > DFX Hip Hop Modern.irs or DFX Metal Rap Big Bass.irs
Cross Channel > 0%
Dynamic System > Enabled (Headset only, when needed)
Listening Device > Common Earphone v2 (I use Sony™ MDR-XB90EX - http://www.amazon.com/gp/aw/d/B008G8...E4L&ref=plSrch
Dynamic Bass > 14%
ViPER Bass > Enabled
Bass Mode > Natural
Bass Frequency > 40hz
Bass Boost > 10db
ViPER Clarity > Enabled
Clarity Mode > Natural
Clarity > 6db
Experience ViPER|Atmos™ & ViPER|DD+™
ViPER4Android & Dolby Atmos™ - Enforcing and Permissive Selinux
ViPER4Android & Dolby Digital Plus™ - Permissive Selinux
When combined with ViPER running my Audiophile™ profile, optimal results can be achieved using the following settings in Dolby Atmos™ or Dolby Digital Plus™:
Music profile
EQ Preset > Open (Flat to tame bass if needed)
Surround Virtualizer > Off
Dialog Enhancer > On
Volume Leveler > Off or On
The resulting sound is absolutely massive!
ViPER|Audio™ || ViPER|Atmos™ || ViPER|DD+™
Sony™ Beats™ Editions
Best processing when used with 16 bit 44.1 kHz FLAC sources. Sound quality degrades deviating up or down from this format. Trust me, I have DSD that play at 30mbps and more.
NOTE :Install Dolby Digital plus version only when Dolby Atmos version is not working .
從 APP 打開
X