以前的是會模擬成 x86
不過 M$ 似乎已經放棄 x86 以後都會用 ARM based emulator
但 Performance 不佳似乎已經變成眾人抱怨的地方
Windows CE 的開發工具 Platform Builder 在下一版 Yamazaki
裡面的 Emulator 也都改成 ARM based
有人是這麼說到
I'd say that most people will start to try
and understand the new OS via the emulator first. So making that a good
experience is significantly important in establishing a good first
impression for evaluators.
然後對於 performance 原作說
In addition, the V1 emulator assumed that the ARM instructions
were produced by an optimizing compiler, and didn't to do any optimization
on its own. This is a good assumption for retail OS images, but not for
debug images, which are compiled /Od. The new DeviceEmulator in Windows CE
"Yamazaki" adds some peephole optimizations to particularly inefficient ARM
and that saves an expensive memory operation.
反正就是會持續改進 DeviceEmulator performance
而快速簡單的 x86 emulator 大概就一去不復反了
看來 MS 總有辦法讓我們換更快的 PC
這個是不是全部版本的連結?
我也是想轉cdb檔
或許在pc上轉檔速度會比較快哦~
AlexHsueh wrote:
有裝成功WM5.0繁...(恕刪)
wm6的模擬器以及新版v2模擬器都可以順利跑wm5的rom,
下載及安裝sdk, device emulator, 及wm5的emulator images,
中英文版都可以在官方網站直接下載,前提是已通過系統驗證,如windows update一樣.
2003se繁中版的rom是x86版,所以不能在用wm5 wm6的arm模擬器上,
試著套用會出現錯誤訊息說是無效的 rom映像.
2003se arm版的image好像只有英文版沒中文,官網中的images全都是x86,
在國外網站看到相關訊息提供參考,
http://www.pocketpcdn.com/forum/viewtopic.php?t=7326
另外,有個不錯免費免安裝的解壓縮軟體叫Uniextract,
可以解開msi檔而不用先安裝一堆鬼東西即可提取映像檔.
用google找囉!
內文搜尋

X