程序有稍簡化, 有用這版工具 root 成功者, 歡迎分享
1、 將AT 100 開機，開啟偵錯模式。
2、連結USB 傳輸線 和電源線（它提供的注意事項有提到，或許是怕改到一半沒電吧）
3、點選 ROOT.BAT ，然後就照它畫面出現的流程照作。
4、有出現以下畫面時，
***************************************************************************
Toshiba HTK55D.33.5.0003 OTA Root Tool *
***************************************************************************
* To continue the root process, you need to do the following: *
* *
* 1. Disconnect your device from the charger and the USB cable. *
* 2. Take your device outside and open Google Maps. *
* 3. Wait for Google Maps to get a GPS lock. *
* 4. Close Google Maps. *
* 5. Reconnect your device to the charger and the USB cable. *
* *
* At this point your device is ready to continue the root process. *
***************************************************************************
拔掉傳輸線和電源線，開啟地圖，到窗外旁邊定位自己的位置（很妙的作法，不知為何），
等定位到後，再插回電源線和傳輸線，按隨意鍵。
5、然後就會一連串的REBOOT，我第一次就是在這邊掛掉，REBOOT後就開不起來，要拔電池。
6、如果REBOOT 開不起來的話，可以稍等一會，再嘗試去長按電源鍵，看是否能順利開機，
我第二次就有順利的開機，所以就有出現ROOT 完成的畫面。
***************************************************************************
* Toshiba HTK55D.33.5.0003 OTA Root Tool *
***************************************************************************
* Congratulations. Your Toshiba Thrive is now rooted. You can now enjoy *
* the benefits and power of having a rooted device, but be aware it also *
* allows you the ability to soft brick your device. This is not a *
* problem in that a soft brick can always be corrected (thank you Toshiba *
* for the unlocked bootloader). *
* *
* Please don't hesitate to visit www.thriveforums.org or *
tabletroms.com/forums/toshiba-thrive if you have any questions! *
以上是我的做法，憑記憶描述的，有興趣的人也可試做看看囉！
***************************************************************************
Toshiba HTK55D.33.5.0003 OTA Root Tool *
***************************************************************************
* To continue the root process, you need to do the following: *
* *
* 1. Disconnect your device from the charger and the USB cable. *
* 2. Take your device outside and open Google Maps. *
* 3. Wait for Google Maps to get a GPS lock. *
* 4. Close Google Maps. *
* 5. Reconnect your device to the charger and the USB cable. *
* *
* At this point your device is ready to continue the root process. *
***************************************************************************
之後照你的做法
插回電源線 跟 USB 隨意按之後
AT100都沒有反應 需要關機嗎?
還是哪裡有問題呢?
如果沒開偵錯 收尋的到AT100資料夾 但開偵錯電腦就找不到資料夾
感謝您分享 但還是無法成功....
內文搜尋
從 APP 打開
X