http://www.slatedroid.com/topic/40226-rom-aokp-jb-by-christian-troy/
AOKP JB by Christian Troy
Features
* UbiFS (like stock roms)
* Bluetooth USB dongle support
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm
Instructions
* Unzip the content of this archive and put it in the root of a MicroSD.
* Put rom (aokp_elf2_$DATE.zip) and gapps (gapps-jb-$DATE-signed_ubifs.zip) files inside internal or external sdcard.
* Turn on the tablet keeping pressed VOL- and POWER until you see the green droid.
* Select "Wipe data / factory reset" (you can use volume rocker to move up/down and power button to confirm).
* Flash rom (cm10_elf2_$DATE.zip), gapps (gapps-jb-$DATE-signed_ubifs.zip) and, the required compatibility zip.
* Now select "Reboot system now".
* Enjoy AOKP!
FAQs
* If you're coming from a stock based rom, it's better if you use "stock" recovery to format "media" partition (the internal memory). And it'd be better if you don't use Google's backup/restore service to avoid breakages.
* Internal memory is mounted at /storage/sdcard0, external sdcard is mounted at /storage/sdcard1. If you wanna swap them (and make primary your real microsd) just flash this file after flashing rom's zip (you have to do it everytime you flash a new version of the rom)
* If you wanna increase the microphone capture volume open terminal emulator and after typing "su" type "alsa_amixer sset Capture 63"
* If you don't like Nexus 7 fingerprint and wanna use SGS-II instead flash this zip. Remember that changing fingerprint may screw Play Store, if it happens you'll have to perform a "wipe data / factory reset".
喜歡的人自己去看看吧
聽取的很多人的意見，先刷飛羽0930：
http://bbs.ainol.com/forum.php?mod=viewthread&tid=25487&extra=page%3D1%26filter%3Dtypeid%26typeid%3D128%26typeid%3D128
據說是可以防止內置SD卡不識別，寧可信其有，不可信其無，先刷再說，3WIPE
具體步驟：
1、先刷成0930；CM rom之前請用機器原生recovery wipe media分區再繼續以下過程
（飛羽說了很多次了：第一次刷CM 的固件請一定要照做這一條）
在無卡的情況下按下「音量-」與「電源鍵」，進入原生recovery ，3WIPE關機
2、將CWM-5.5.0.4-fire_XX.zip ( XX 代表相應的 QM 或 TM) 到解壓出文件複製到 SD卡裡
3、制 cm10_elf2_20121018.zip, gapps-jb-20121011-signed-ubifs.zip and fire_XX-cm10-compatibility-X.X.zip 到sd卡
3. 重啟平板到 CWM recovery 模式中 (關機狀態下同時按電源鍵 與音量減)
4. 選擇wipe Data/Factory reset並確定格式化
5. 選擇Install zip from sd card選項並且從sd卡裡選擇要刷入的ZIP壓縮包，首先刷入cm10_elf2_20121018.zip.
6. 然後選擇刷入gapps-jb-20121011-signed-ubifs.zip
7.最後刷入fire_XX-cm10-compatibility-X.X.zip (XX是QM 或 TM) (然後你可以刷入你自己準備好的其他需要的補丁)
8. 重啟平板
按照我說的這樣做基本上可以萬無一失
這時基本上只等開機初始設置
dragonking16 wrote:
請問各位大大我用CW...(恕刪)
再次感謝囉
內文搜尋
從 APP 打開
X