嘉義放山雞 wrote:
請問用playerp...(恕刪)
可以的.
151515151515151515151515
ninkimono wrote:
好文.好人 ~ 不推...(恕刪)
是在說我嗎 ??
其實我 所學的 及 目前的工作 與 " 3C " 一點關係都沒有.
所有的知識皆是從網路自學而來.
有感於 M01 手機版 近來的亂象....[略]
故想把自己使用後覺得不錯的經驗與網友分享.
也希望 M01 手機版討論區 能儘速擺脫 "工讀生" 及 "義和團" 充斥的議題... [茶 & 菸]
---------------------------------------------------------
有些遠離議題了...., 抱歉 !
---------------------------------------------------------
再 "下毒" 一下,
昨日刷了 Stone Kernel OC version v0.7 + PROJECT DIRECT INJECT v1.0.1 + CrossBreeder - 6.13.13_v3,
經過 1 日 的 "不負責任試用", (希望 Asus 版的 "棒!棒!棒!" 先生不要來砲我...
)感覺我的 PF 2 變得: (1) 更省電. (2) 更滑順. (3) 更敏銳.
應該是與 Stone Kernel 有關. 轉貼其功能介紹如下:
Stone custom kernel for ASUS Padfone 2 v0.7
Main features:
Based on ASUS source code v10.4.16.8, compatible with Android 4.1.1 stock PadFone2 firmwares
init.d support (init.rc busybox runparts)
USB OTG Host in phone mode
UI rendered with GPU instead of CPU, making it very snappy
Lowest CPU frequency set to 192mhz
CPU frequency locked to 192mhz-1512mhz during boot
Undervolted to save power & reduce heat
Undervolt interface (compatible with System Tuner, Kernel Tuner, etc)
Additional CPU Governors: Wheatley, InteractiveX v2, MSM_DCVS
Set InteractiveX v2 CPU Governor to default instead of Performance, to lower battery consumption, maintain snappy performance, and improve CPU freq config
GPU normal freq set to 128mhz to lower battery usage (will still scale upto 487mhz when busy)
Simple IO Scheduler (SIO) added, and set as default
Increased min/max read-ahead values from 16/128 to 32/1024
USB FastCharge upto 1400mA (enable using Kernel Tuner, sysfs, etc)
OC version: Overclocking upto 1.72ghz for a bit faster performance
OC version: GPU overclock to 487mhz
Currently two versions:
"OC" = CPU OC to 1.72ghz, GPU OC to 487mhz. Lower CPU voltages.
"STD" = No OC. Only slightly lower CPU voltages than stock.
Minor tweaks:
Replace Wifi modules with AOSP versions (needed due to the way the stock modules were compiled by ASUS)
Disabled swap
Disabled "Compile the kernel with debug info"
Disabled Debug memory initialisation
Disabled Magic SysRq key
NTFS in kernel (instead of module)
FAT support
Disabled "Use MSM_DCVS for CPU/GPU frequency control"
Improved CPU multi-core frequency limiting
一直張 wrote:
想詢問版大，如只有r...(恕刪)
1. "理論" 上是可以不用解鎖安裝的.
2. 有於第 6 個提示: Do you want to install entropy? (你要安裝 "Entropy" 嗎?) 按 "1" 進行安裝嗎 ?
若有安裝 entropy, 輸入 "su", 按 "Enter 鍵".
再輸入 "entropy" , 按 "Enter 鍵" 之後應會出現 "entropy 選單".
建議於 "Terminal Emulator" 輸入 "su", 按 "Enter 鍵",
再輸入 "directinject" , 再按 "Enter 鍵".
先確認一下是否已完整安裝.
liqueur wrote:
1. "理論" 上是可以不用解鎖安裝的.
2. 有於第 6 個提示: Do you want to install entropy? (你要安裝 "Entropy" 嗎?) 按 "1" 進行安裝嗎 ?
若有安裝 entropy, 輸入 "su", 按 "Enter 鍵".
再輸入 "entropy" , 按 "Enter 鍵" 之後應會出現 "entropy 選單".
建議於 "Terminal Emulator" 輸入 "su", 按 "Enter 鍵",
再輸入 "directinject" , 再按 "Enter 鍵".
先確認一下是否已完整安裝.(恕刪)
我確認了，一樣的情況....><
我在懷疑是不是我少安裝第三方 cwm
沒解鎖的情況下不知道能不能裝第三方的CWM,所以我沒裝
嘉義放山雞 wrote:
那不好意思再請問一下...(恕刪)
1. 您是裝 Viper XHiFi 或 Viper FX ?
Viper XHiFi 是著重於音質還原, Viper FX 則是為音效渲染.
也有許多 "神人" (我也是
) 2 者一起裝, 享受 "調整" 的快感...播放器可無須任何設定, 直接於 Viper XHiFi 或 Viper FX 進行調整即可.
基本上皆是憑自己的喜好去微調, (青菜蘿蔔各有所好!!)
若是懶得調整, 也可下載 Viper FX 的 "脈衝樣本" 套用,
一定可選到自己喜歡的 音質 / 音效 / 音場.
建議至(forum.vipersaudio.com)尋寶...
2. KKBOX 我也試過, 沒問題的.
內文搜尋
從 APP 打開
X