onymoe wrote:
而是停用那個Modem後，再去用我之前貼的方法～
試試把 LG Android Driver灌上去看看，看能不能刷機～..(恕刪)
onymoe wrote:
1.抓取以下必備軟、韌體
a.ROM： http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ATWMAP/V20a_00/V20A_00.kdz
b.更新工具：KDZ FW UPdater: http://files.gameworld.kz/5p8mpt3f1n.html
c.連線與驅動：LG Android Driver: http://files.gameworld.kz/c5z46n1ukk.html
2. Install LG Android Driver. //檔案c
3. On your phone, go to Settings > Applications > Development and set phone into debugging.(偵錯模式，這時電腦會叫三聲，正常的) //這裡沒作..因為已經變成DownLoad Mode了..
4. Connect phone via USB Cable. //手機用usb線連線至電腦
5. Run Windows Enabler from the file you extracted above(在更新工具裡), and when it appears in the Task Bar (Bottom right) click the icon in the task bar ONCE, and it will display as 'On.'(右下角的圖會多一個ON)
//先執行檔案b解開後的 Windows Enabler.EXE,當右下角出現雙視窗的小圖示後,用滑鼠右鍵點擊一下,右下角的小圖示會多一個ON
6. Run KDZ_FW_UPD.exe. Select 3GQCT in the drop-down menu, which is greyed out. Then Browse to where the KDZ 2.1 file is. (Desktop? V20B_00.kdz) Press the long button just above the information screen, and leave it for a good five to ten minutes. Your phone will enter Emergency Mode two or three times, however you need not do anything. Do not unplug it, do not power your computer down and don't interrupt the process. Your phone will start up completely formatted, and when the KDZ updater has finished, you can unplug your phone and use it again, with 2.1 installed.
(這段就是都選好後，點一個很長的bar讓它開始更新，約5分鐘吧～重開一次後，就是新的2.1的OS了) ^^
//再執行檔案b解開後的 KDZ_FW_UPD.exe,選擇手機模式 3GQCT，再把V20a_00.kdz的位置指向，再點下面的長條bar執行更新
(我本來以為剉屎了..)
從 APP 打開
