貼上gps. Conf # This configuration file (GPS) is automatically generated from shell script. #Uncommenting these urls would only enable #the power up auto injection and force injection(test case). #XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin # TODO:LGE_GNSS: Please DO enable the next line when you merge the CAF XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin #XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin #XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin #XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose # If DEBUG_LEVEL is commented, Android's logging levels will be used DEBUG_LEVEL=1
# Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0
# Below bit mask configures how GPS functionalities # should be locked when user turns off GPS on Settings # Set bit 0x1 if MO GPS functionalities are to be locked # Set bit 0x2 if NI GPS functionalities are to be locked # default - non is locked for backward compatibility #GPS_LOCK = 0 # TODO:GNSS_LGE: Please DO enable the next line when you merge the CAF GPS_LOCK=0x0
# supl version 1.0 SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable SUPL_ES=0
#Choose PDN for Emergency SUPL #1 - Use emergency PDN #0 - Use regular SUPL PDN for Emergency SUPL USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
#SUPL_MODE is a bit mask set in config.xml per carrier by default. #If it is uncommented here, this value will overwrite the value from #config.xml. #MSA=0X2 #MSB=0X1 #SUPL_MODE= # TODO:LGE_GNSS: Please DO enable the next line when you merge the CAF SUPL_MODE=1
# Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000
################################ ##### AGPS server settings ##### ################################
# FOR SUPL SUPPORT, set the following # SUPL_HOST=supl.google.com # SUPL_PORT=7276 # TODO:LGE_GNSS: Please DO enable the next line when you merge the CAF SUPL_HOST=supl.google.com SUPL_PORT=7276
# FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234
# Bitmask of slots that are available # for write/install to, where 1s indicate writable, # and the default value is 0 where no slots # are writable. For example, AGPS_CERT_WRITABLE_MASK # of b1000001010 makes 3 slots available # and the remaining 7 slots unwritable. #AGPS_CERT_WRITABLE_MASK=0
#################################### # LTE Positioning Profile Settings #################################### # 0: Enable RRLP on LTE(Default) # 1: Enable LPP_User_Plane on LTE # 2: Enable LPP_Control_Plane # 3: Enable both LPP_User_Plane and LPP_Control_Plane LPP_PROFILE=0
################################ # EXTRA SETTINGS ################################ # NMEA provider (1=Modem Processor, 0=Application Processor) NMEA_PROVIDER=1 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) SGLTE_TARGET=0