• 1028

(6/11)MIUI7.0..(X10專用)

BOB大,謝謝您的新ROM,不知是否是開著3G的關係,裝完了電量掉了10幾%,所以開著WIFI會比較來得省電.
快樂使用中.(也許家裡附近訊號接收不良,比較耗電)
bob19620102 wrote:
1/5..超級新版本...(恕刪)

albert5267 wrote:
說了wifi完全沒有...(恕刪)

你可能碰到阿飄事件了吧...
沒人回答你 就是只有你自己才會發生的怪問題...
沒去開WFIF 卻會自己掃描? 應該是你有安裝到甚麼怪程式 會偷偷強制去掃描吧..
kenjishir wrote:
不知道為甚麼ThGo2_18_bob~1這個檔案下載到22.6MB就下載不下來了@#$$

我試過 下載正常..


allen9586 wrote:
BOB大 請問一下
有辦法 刷18-1版的通知列嗎?

不懂你問題的意思?..
Bob大!今天重新下載可以了....檔案沒有問題
Fera教你怎麼解fps(恕不翻譯)


No. Why?
ok..lets give some FPS lesson..

Let me explain how do we uncap fps - simple! Just disable V-sync in msm framebuffer and DONE!.. For what V-Sync is for? To make screen run smoothly..not running too much but not being too slow.. to run middle and smooth way. How it works? Simple! It V-Sync stands for Vertical Syncronization, that means every frame is being syncronized with cpu/gpu.

- Why it won't be uncapped on JB?
- Cuz V-sync will be implemented in different way.called Projec tButterSmooth

- Fera, then why our screens don't flicker on fls uncap ha?
- Because our device has 2 ways of screen syncronization, both enabled by default - Hardware V-sync and Android V-sync. We disable Android V-sync in kernel.

- Damn..Why do we need HW V-Sync?
- Cuz without it we couldn't use out screen..It's hardware Limitation and our device can maximally refreash 60 times per second (60Hz), so maximal REAL Fps uncap can be 60FPS.. despire you get 70..or etc..on your benchmark..it's in system...But you can maximally see with your eyes only 60fps. it's HW limitation.

- What will be if we disable damned HW V-sync man?
- We get flickering chopping screen.. but benchmark could tell us that we get 90FPS.. that is true.. i did and experiment once.. and antutu gave me 92 fps.. but device was unusable..i hardly opened antutu 

- What if we disable HW V-sync and leave android V-sync enabled?
- Well..screen will be still flickering but on low 30fps..i tried all aff this stuff trust me..

- But Fera, Using both v-sync's isn't too much? Feels like it will be laggy man..smoothly but laggy..
- Yeah.. smooth but slow..you can observe it on clean stock SEMC rom..BUT! This is JellyBean rom and V-Sync will see another implementation as i said. I will get like ~45fps being Syncronized!.. this means smooth and fast at the same time! (1.5x faster than stock rom)

- What's the way of that new implementation? how it can be different?
- In JB v-sync is made by GPU not by cpu/gpu..so now cuz of hw rendering we don't need to wait cpu to analyse frames..it will be done automatically, and HWA speeds up all this stuff..providing direct access to GPU

- Dude I don't care about fps count..i just wanna use fast flying smoth rom..
- I love you man...deep inside... 


Peace 
就是我想要刷18-1的樣式
我原本是想刷ASD大大的美化檔
可是我用18版刷了以後,他會卡開機動畫..

allen9586 wrote:
就是我想要刷18-1...(恕刪)

不要亂刷美化檔..(那些都是舊的 當然會衝突)..你不要刷那美化檔 就不會有問題.
感謝bob大大再度分享,目前測試很順,沒遇到甚麼狀況,謝謝
自己從aj ROM裡面的framework res的圖檔抽取吧……
但是可能要像我一樣花1小時左右(因為我並不是全部都想要xs的主題,所以用了很多架構檔)

bob19620102 wrote:
不要亂刷美化檔..(...(恕刪)


謝謝bob大分享,昨晚刷完將手機回復原廠設定後一直當在開機畫面。
後來將記憶卡取出,把刷機檔copy 到記憶卡重刷一次就正常了
目前快樂使用中
超級順的, 給Bob大
耗電部分, 可能需要在測試看看, 現在還感受不到...也許電池又老化了~
  • 1028
內文搜尋
X
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 1028)
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?