最新版 S2U2 v2.00, 18 June 2009剛發佈

剛出爐的哦!
官網
18 June 2009
S2U2 v2.00 released!
下載:
S2U2 for QVGA/WQVGA
Clock Pack for QVGA/WQVGA
Language Pack
下載後記得先更換語言檔:
將下載的S2U2LanguagePack.ZIP解壓後, lang.ChineseTraditional.ini更名為lang.ini替換program file\s2u2目錄下原有的lang.ini即可.

new S2U2 Settings:
· new user interface; subgrouping levels;
· change/browse the wallpaper or wallpaper folder; on-screen zooming/cropping;
· change/browse the lock/unlock sound (MP3 is supported for WM6 or later devices);
· added sleep timer for S2P;
· added save/load theme.

more comprehensive "slide to view":
· show the latest 5 missed call details (press & hold the missed call icon);
· show the latest 5 active task details (press & hold the active task icon);
· directly go to that unread email/SMS (shown on a pop-up) when unlock;
· to dismiss a pop-up, either tap the pop-up or the corresponding notification icon.

· added emergency call function when password is enabled.
· added options to show text shadow effect.
· added option to tune the opacity of the curtains.
· added a third CallerID option - Framed.
· added option to "Always Hide the system incoming pop-up". In the old version, the system incoming pop-up (SIP) will be disabled permanently once S2U2's CallerID is activated; if you want to use the SIP again, the device must be soft-reset after turned off the CallerID. With this new option set to off & soft-reset, the SIP will not be affected by S2U2's CallerID; but a side effect - even CallerID is turned on, the SIP will be shown shortly at the beginning of an incoming call.
· localizable call waiting incoming screen.
· added InCall Volume Control.
· added option to delay the startup of S2U2 when the device is booting up.
· added support to WM6.5 - only tested on the WM6.5 emulator; when the system lock is activated, S2U2's CallerID will be temporarily disabled.
· removed PhoneNoFormat, added option "Canonical number format".
· added back the "Lock when Screen is Blank" option.
· removed option to delay the email preview, it's now done automatically.
· faster screen redraw, even on Landscape or on WVGA devices.
· increased the exception EXE list to 20 entries & moved to /HKEY_CURRENT_USER/Software/A_C/S2U2/Exceptions
· some graphics changed.
· some minor bugs fixed.
2009-06-19 2:34 發佈
安裝完成, 語言也換了, 測試過後, 似乎沒有完全中文化..
至官網下載S2U2LanguagePack.ZIP解壓後,
將lang.ChineseTraditional.ini更名為lang.ini
替換program file\s2u2目錄下原有的lang.ini即可.
記得要先關閉S2U2,

若還不行試另一個方法:
1). 將program file\s2u2目錄下原有的lang.ini文件名稱更改為任何其他名稱,再將lang.ChineseTraditional.ini更名為lang.ini複製到指program file\s2u2目錄下。
2). 等到軟體中文化完全安裝完成後,再回頭來將剛已更改為任何其他名稱的.ini文件刪除。

以下是我完成的範例:



比較好奇 新版的有修正在滑動解鎖介面上的鬧鐘始終顯示 00:00 的問題了嗎

感謝分享
剛剛安裝了感覺不錯.

有個問題,請教一下

我用在 i908上 來電的時候.無法螢幕滑動鎖好像沒有用處.一樣會直接顯示接聽的畫面
如果我想要先用螢幕鎖,解鎖之後再接聽.

有可這樣設定嗎?

不然有時候放在口袋中 電話一來 手機拿出來就接聽了.挺麻煩的.


謝謝

半桶水 響叮噹呢~
bl1978 wrote:
感謝分享剛剛安裝了感...(恕刪)


安裝後測試發現除了多些功能外, 其餘的 BUG 都還在, 譬如重新開機後的第一通來電仍無頭像跟來電號碼顯示, 跟 V1.62是一樣的,
另外bl1978大大的問題應該是S2U2設定的問題,
小弟的無此現象
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?