welcome: you have come to the right place. 這是客套話XD
Moving from stock jvr is very easy or from any other firmware, kernel or rom. 從哪裡來的都不重要XD 只要你聽話就很簡單。
Here are the basic steps: 以下是幾個基本步驟
1. download the GTO Tornado kernel in its most recent version 下載 GTO Tornado kernel 核心最新版本(近期的就可以)
2. download the Tornado XXJVR rom 下載 Tornado XXJVR rom
3. do a complete nandroid backup and also do a backup of your apps within Titanium. 做一個完整的備份 同時也可以用Titanium(鈦備份)做一個"軟體"上的備份
4. follow the directions for a complete clean of your phone here: http://damiangto.emc2production.org/viewtopic.php?f=11&t=213 請照著網址內的步驟去做一個完整乾淨的手機清除動作 (看不到請註冊會員,或者等我或其他人做翻譯)
you will need to replace the files in step 2 with the stock jvr files available from samfirmware -- 乾淨清除裡的第二步驟要記得做,他會幫你取代檔案
do not use stock files that have been deodexed or come from other sites 不要去使用那些已經被deodexed過的ROM 或者是來自其他地方 不能信任的東西
5. a complete clean as per the guide is necessary as "issues" arise from stuff left on the phone from other kernels and roms prior to using Tornado firmware -- 一個完整乾淨清除是很必要的,因為往往刷完ROM會發生一些問題,都是因為有東西殘留在手機裡面, 可能是你刷過不同核心與不同的ROM
a clean install gets you a problem free install, failure to use the guide as specified has resulted in users having problems -- 乾淨清除的安裝才能使你不產生問題,那些不照指示操作的人往往導致他們有許多問題
you can't help people who don't read or follow instructions. 不按照指示去操作的人,誰也幫不了你
6. as per the guide, flash the Tornado kernel using odin, putting the kernel in the pda spot -- 照著指示,開啟 odin ,把核心檔(kernel),也就是副檔名為.tar的檔案,放在pda欄位去刷
do not automatically re-boot, but manually pull the battery after flashing and go into revocery before re-booting. 不要讓他自動開機! 而是當你確定刷完核心後,先拔USB線、後電池拔掉再裝上,然後三鍵進入revocery模式
7.Do a davlik cache clean and cache clean, use the ultimate options to set CPU and screen sensitivity, use the options to convert to ext2, reboot. 做雙wipe,wipe cache + wipe dalvik-cache (藏在倒數第二個選項裡) , 從ultimate options 進去設定你想要的CPU頻率(1440MHZ)、電壓(我-45mv)、螢幕感應程度(最高)、 以及 轉成EXT2 後 ,重開機!
(有 system 跟 filesystem 都要轉ext2,前者要等你重開機它才會詢問你要轉哪種格式) (當然是選EXT2)
8. Copy the Tornado rom to your sd card, go to revocery and flash the tornado zip. Re-boot. 複製 Tornado rom 到你的 內部Sdcard,三鍵進入revocery模式後 做full wipe ,也就是 wipe data /factory reset, wipe cache ,wipe dalvik cache 然後 刷tornado zip,重開機! 等待安裝數分鐘請耐心等候...
9. Use the Tornado app to add any options not installed within the base rom (e.f. bluetooth, theme etc.) 請使用Tornado app去安裝你會需要的app (如果你是刷威大的ROM,他有出集成包,那就不需要管這點了)
10. use market to install Titanium backup, re-install you favourite apps. 安裝鈦備份軟體,還原你之前所備份的軟體 (記得,這邊說的是應用程式與資料,請不要還原其他東西以免造成衝突)
11. wonder why everyone does not do the same and have the best galaxy phone experience as you! 這句話我不知道怎麼翻比較妥當,但是我想他不是重點XD 跳過
remember, the galaxy is in fact very hard to kill -- 記住,i9000事實上是很難被你幹掉的XD
most people's fears are what if I brick the phone? 很多人都害怕是否手機變磚?就是壞掉的意思XD
Follow the guide as posted and this won't happen. 照著上面的指示操作就不會發生!
The reason for a clean install is to give you a stable install as a base. 想要一個穩定的ROM,那你就得做 乾淨的安裝
The reason for backing up your apps and system once you have a stable install is to allow you to play with the phone knowing you have a stable base in recovery to return to 只要做一次穩定安裝後就為你的手機做backup(CWM備份),之後有毛病可以自己還原回去。
(e.g. if you want to install a theme, you can revert back to your stable base provided you have saved this first initial clean install). 假如你想要安裝一個主題,你可以先還原回去第一次穩定安裝的系統再去安裝會更穩