kis42965 wrote:
三星最版N900XX...(恕刪)
問題，已解!...
已刷好N900XXUDND2-OEM
xda 作者 ： david515
文章連結 ：這一篇的 77 樓 http://forum.xda-developers.com/showthread.php?t=2642207&page=8
文章內容轉貼 ：
(Knox had been triggered on the the tested device already), This has been tested & working on Note 3 N900/Exynos on KitKat ND1 firmware which was on official status without root but Knox triggered, The file was flashed using Odin and after flashing I went into download mode and to my surprise Knox was been reset from 0x1 to 0 but the device status had turned custom (was official before flashing the Knox reset), however I will re-flash the firmware and see if Knox remains 0 and device status turns to official, also there are some different stuff in download mode which I hadn't ever seen before like EMMC PIN, Binary Sboot Version and all. I'll be attaching the screenshots for the same kindly find in attachments.
Edit : After re-flashing the firmware stuff like EMMC PIN and Binary Sboot Version has disappeared Current Binary has turned to official and the Knox has remained to 0 however System Status still appears to be Custom...
Edit 2 : (Refers to previous updates regarding System Status being Custom and not turning to Official.) After trying to flash the firmware several times nothing really worked (nothing to do with Knox and Current Binary only referred to System Status being Custom) hence I went to stock recovery and wiped Data/Factory Reset and Cache Partition and then re-flashed the firmware (ND1 KitKat) and VOILA! Binary/System Status are now Official and now Knox is 0, seems a great success for the Exynos users, I also do have an snapdragon version so will be looking forward to it, screenshots attached....
Edit 3 : The steps for resetting Knox (Exynos Note 3 ONLY!) :
1 - Download this file from here : http://sxtpdevelopers.com/samsung-no...-fix-qualcomm/
2 - Open Odin and put device in download mode.
3 - Select AP/PDA (depending on Odin version you have) and select the file for resetting Knox (which was downloaded during step 1) don't select any other option in odin except F reset time and auto reboot (are selected by default).
4 - After the file is flashed go to download mode and check if the Knox has turned back to 0.
5 - Flash official firmware from sammobile and after flashing is done let the device reboot and boot up to device set-up screen, don't proceed the set-up for setting up device and turn of it off.
6 - Reboot to stock recovery (power + vol up + home) and wipe data/cache and flash the firmware again, once flashing the firmware is completed enter download mode and check if current binary and system status has turned to official if not follow steps number 5 and 6 again.
And that's pretty much it , you have successfully been able to reset Knox and regain warranty by this.
PS : I had done all this steps on ND1 firmware, and this will not keep root access, to root Knox has to be tripped. Also to note this might get (patched) in future updates (bootloaders) if we look at Samsung's history of patching stuff , though not sure about it...
This will not work on any variant other than Exynos (Note 3) due to different processors and the boot system of both Exynos and Snapdragon. (the file for resetting Knox (Exynos) contains Sboot which is only for the Exynos variant which cannot be used on Snapdragon as it uses Aboot). So this is by no way meant to work on SD variant or any other Samsung device ie S5/S4/Note 2 etc. and hence requested NOT TO USE IT on any other model than Exynos Note 3.
下一篇 ，我再說明，如何將台版的 rom , 還原至原廠， KNOX WARRANTY VOID : 0 ， 設備狀態是原廠 ，回修就有保固
這部份若有任何閃失，請自行負責 ，
下面是我實際操作，是可以回復到原廠狀態
1. 先下載 BL_HA3GZS_CLEAR_WARRANTY_BIT.tar （2.22 mb)
http://pan.baidu.com/s/1c09ubNq
2. 首先 3W3F , 用 ODIN 刷 台版原廠的 ROM
三星台版原廠 4.4.2 正式版的 ROM
N900ZSUDNB4_N900OZSDNB4_BRI.zip （1.35G)
http://sync.hamicloud.net/_oops/cschien.cs/tji
百度雲
http://pan.baidu.com/s/1pJ36xBl
A. 這次是單刷包，解壓縮後，有一個 tar 檔
B. odin 刷 rom 之前請先 3w3f (避免怪問題）, 再按 音量下+電源+[HOME] , 進入線刷模式
C. odin 的工具，請用
Odin3_v1.85.zip （193 kb)
http://sync.hamicloud.net/_oops/cschien.cs/rx4
3. 刷完原廠的 ROM , 重新開機後，跑到第一個畫面 ,都不要做任何設定
4. 按 音量下+電源+[HOME] , 進入線刷模式 ，再刷 BL_HA3GZS_CLEAR_WARRANTY_BIT.tar （2.22 mb)
放的位罝如下
5. 刷完 BL_HA3GZS_CLEAR_WARRANTY_BIT.tar ， 跑到第一個畫面 ,都不要做任何設定
按 音量上+電源+[HOME] , 進入卡刷模式 ， 做 3 WIPE , 重新開機，
Wipe data/factory reset
Wipe cache parrition
6. 第 5 個步驟 , 我按 音量上+電源+[HOME] , 無法進入 Recovery , (作者說，再線刷一次原廠的 rom , 就可以）
7. 所以，我 3w3f 後，用 odin 再刷 N900ZSUDNB4_N900OZSDNB4_BRI.zip （1.35G) ，
8. 重新開機後，按 音量上+電源+[HOME] , 可以正常進入卡刷模式 ，
9. 再 按 音量下+電源+[HOME] ，畫面顯示 KNOX WARRANTY VOID : 0
10. 重新開機，正常設定 ， 設備狀態，已變為 原廠
接下來，我們已經可以放心刷 rom , 所以要刷 Recovery + Root
1. 再來線刷 Recovery
n900-cwm-recovery-6.0.4.7-kk(0125).tar (6.68 mb)
http://sync.hamicloud.net/_oops/cschien.cs/rhj
2. 再來卡刷 Root
UPDATE-SuperSU-v1.94.zip (1.14 mb) (最新版）
http://pan.baidu.com/s/1eQCDN2M
3. 就可以開始刷 rom
openrecovery-twrp-2.7.0.4-ha3g.zip (8.07 mb)
http://pan.baidu.com/s/1eQBrRb0
TW_V7.0_20140424.zip （60.4 MB)
http://pan.baidu.com/s/1sj2NT7n
0313 升級至 0424 版
TW_V7.0_20140424_csc.zip (88 MB)
http://pan.baidu.com/s/1qWjTgmg
1. 最新三星中文輸入法（V7 0424 )
2. 照相聲有開關控制
3. 連絡人快速撥號 10組 增加至 100 組
4. 連絡人有撥號鍵及google 帳戶
5. 連絡人可用注音搜尋
6. 連絡人姓名長度不限制
7. 瀏覽器有退出功能
8. 日曆(週日)有農曆
9.原生瀏覽器按退出瀏覽器時會有確認是否要退出瀏覽器訊息
10.原生瀏覽器按設定時顯示進階設定
11.增加連絡人有撥號按鍵
12.快速撥號 10 組增加至 100 組
13.聯絡人的長度不限制 (1280)
14.開啟三星鍵盤字集功能
15.從設定隱藏軟件更新
16.開啟設定時,顯示您的硬體版本（同輸入*＃12580 * 369＃）
17.S-NOTE 有中文輸入/手寫
18. 撥號界面是注音
作者網址
Downloads
優化包
http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances%E2%84%A2X_Stock.1.4.zip
還原包
http://www.mediafire.com/download/gnfh45p2ao2th07/PurePerformances%E2%84%A2X_Uninstaller.zip
★ [MOD] ◢ PurePerformances™X ◣ | Golden Edition | Scary performances on Android
everything you've always wanted from a performance engine, but you never dared to ask
__________________________________________________ __________________________________________________ _______________
Here I am back with another mod of the Pure™Series.
After improving the system sound quality and graphics, it is time to improve Android. But be careful! This is not the usual performance engine which adds only script in the / init.d folder,
This time will be improved the android system at 360°! Basically this engine is a collection of concepts of all performance engine of the forum, that none of us will ever be able to install because many would conflict.
My testers were stunned by the power of this engine, but why not try it yourself? Are you ready to receive scary performances, to blow up the AnTuTu score counter?
Well, talk about serious stuff
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and discover its power! :P
內文搜尋
從 APP 打開
X