張小明 wrote:
ES大你好 我照QQ大大的刷機步驟刷I9300ZSALF1 Deodexed + Rooted成功了
之後刷電池有數字+電話錄音及鈴聲直接大聲+S3_Theme_A8
不過刷完A8美化包 下拉圖示還是原廠樣式 其他的地方都有美化成功
請問要怎麼刷才會正常顯示呢? 謝謝(恕刪)
Q: 刷完A8美化包 下拉圖示還是原廠樣式 其他的地方都有美化成功
請問要怎麼刷才會正常顯示呢?
A. 因為 I9300ZSALF1 這個 ROM 沒有下拉 15 鍵的功能, 所以美化包,刷下去,沒有變化
解決方式
1. 先刷 C71 => 取得有 下拉 15 鍵的功能
2. 重新開機
3. 再刷美化包
a207342005 wrote:
我是刷大大的ROM ...(恕刪)
Q : 才導致成這樣 想問我想要桌布不跟著滑動我該如何設定
A : 可刷下面這個直刷包
原廠桌面
http://webhd.xuite.net/_oops/cschien.cs/a0q
SiyahKernel S3-v1.3.5beta
=Download = (CWM)
(v1.3.4 -> v1.3.5) fixed mic issue with Omega ROM (at least on the one that I use now, and probably with some others). make sure you power-off the device after you flash & then restart. thanks to ::indie::@XDA for giving me enough information about the differences.
=Download =
Features / changelist:
Perseus alpha16 (3/07):
Disabled touchscreen touch booster; this previously locked the CPU frequency at 800MHz, memory interface to 400MHz and bus frequency to 200MHz at any time the finger touched the screen.
Implemented flexrate capability into pegasusq; additionally added a frequency threshold above which flexrate requests are ignored. Currently this is set at 800MHz but is configurable in the governor tunables.
Enabled quality of service requests in the touchscreen driver, this currently triggers a flexrate request at a sampling period of 15ms over the governor default of 50ms, and over 5 periods, giving 75ms of heightened reactivity. It also sends a direct memory access throughput quality of service request to the the linux power management quality of service interface to guarantee a 266MHz bus frequency for 142ms. Still need to check if that the last part works correctly.
內文搜尋
從 APP 打開
X