最近有些人因為不知道八月份過後的Desire手機，已經將amoled改為SLCD
刷了一些amoled版Rom，進而導致黑螢幕
剛剛在網路上爬文爬到一篇，給目前黑螢幕急需解決的人試試看是否可以解決
若有解決問題，請回報給大家知道，謝謝
文章若有侵犯處，請告知小弟會將他移除
刷機有風險，請自行斟酌
How to fix black screen on HBOOT 0.83 / 0.93 / SLCD phones (back to stock / no root!)
Ok, the new Desire phones have the new SLCD. Although the screen is improved over
AMOLED, it also has it’s bad sides. People who bought a Desire and received it with HBOOT 0.83 and 0.92 will most likely have the dreaded SLCD. The downgrade method in this thread will not work for them (it will cause the phone to have a black screen).
So if your phone is HBOOT 0.83 or 0.92 from stock then don’t downgrade to a lower version of HBOOT!
For the people who already downgraded, and have the black display, the fix is below!
Method 1:
Download:http://liveimage.htc.com/OTA_Bravo_F…crut4wrv30.zip and rename it to update.zip then follow instructions
(Remember to remove PB99IMG.zip from your GoldCard before copying update.zip)
1. Make sure the update.zip (NOT update.zip.zip!) file is on your goldcard and correctly named.
2. Take the battery out first to ensure the phone is powered off. Then hold vol down and press the power button, and hold vol down for about 5 seconds. That will get you into the bootloader even though you can’t see it.
3. Press vol down once. This will select recovery.
4. Press the power button once. This will start the recovery. The phone will vibrate briefly.
5. Wait 20 seconds or so. Then press vol up and the power button and wait a few seconds. You’ll now be in system recovery.
6. Press vol down once to select ‘apply sdcard:update.zip’.
7. Press the power button once to start the recovery.
8. After a few seconds press the power button once again.
Method 2 if you want to keep Android 2.1:
It is also possible to recover using a stock RUU. This may be useful if you want to run 2.1 instead of upgrading to 2.2, or you want to upgrade later.
The RUU that is compatible with SLCD phones is here:
http://shipped-roms.com/shipped/Brav…222_signed.exe
To run this, make sure your goldcard is inserted and start the phone in fastboot mode (hold back key and power button).
If you get a 140 error when running this, you will probably have to use the update.zip method for FroYo (of course if you do want FroYo you don’t need to worry about this).
文章轉載於android-tutorials.org
從 APP 打開
X