D214002001 wrote:
是的沒錯^^...(恕刪)
請問有沒有什麼要特別留意的地方？
任何版本皆可嗎？還是說一定要跟手機本身的FIRMWARE相同才行？
小弟試刷過JELLYBEAN，可是卡在開機動畫就進不去了
換別的可行嗎？
有沒有推薦穩定好用一點的ROM可載呢？
另外是不是日後我就收不到OTA的更新？
麻煩您了，萬分感謝。
pman915 wrote:
請問有沒有什麼要特別...(恕刪)
如果要刷JB好像就不能了-.-...因為我也試過不能開機頂多4.0.3...建議就刷4.0.3或以下的ROM
這邊是國外的XDA論壇http://forum.xda-developers.com/forumdisplay.php?f=1230
大陸的ROM建議別刷很毒!!!看看就好!!!
Starting up......
Connecting to device...
Searching device.....
Found device.....
Found backups!
Making room for beer......
Loading sixpacks on sdcard......
Loaded......
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
（中間洗版略過）
Do not remove sdcard from phone
Do wire-trick now!! Check the instructions at http://unlimited.io
=== Waiting for device....
(9/45)
Found device...
Waiting for device to settle... Please wait...
Getting into bar.....
Raising Glass
SUCCESS - Taking a sip.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Beer is tasty.
SUCCESS - Buddies and Beer
Checking alcohol level......
Let's take one more......
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
Quit....
Press ENTER to exit.....
想請問一下，已經刷入jb_boot.img，手機開機也是綠字的JuopunutBear字樣
但是短接一次後卻出現這樣的訊息
應該怎麼處理？
還是還有什麼訊息要提供嗎
先感謝回答的人了
－－－－－－－－－－－－－－－－－－－－－－
已經自行摸索成功
出現Errorcode: 66732337表示跳線的節奏不對，重來一次吧
很接近成功了
再度執行controlbear.exe這次會出現No Juopunutbear boot image found 在退出程式
在執行adb打上 adb push jb_boot.img /data/local/tmp/好了之後再次執行 controlbear.exe
應該是要出現
Do not remove sdcard from phone
Do wire-trick now!! Look instructions at web
但是我的只出現如下文文字....
請問我該如何= ="我的手機是降到1.53.007板後開不了機(停在htc畫面)且還是S-ON
======== ControlBear 0.8 beta for JuopunutBear S-OFF ==========
Starting up......
Connecting to device...
Searching device.....
Found device.....
Found backups!
Cannot open file /data/local/tmp/jb_boot.img
Using eMMC dev /dev/block/mmcblk0
Using MMC dev /dev/block/mmcblk1
Boot partition is /dev/block/mmcblk0p20
Recovery partition is /dev/block/mmcblk0p21
Is information correct?
You have 5 seconds time to stop process by pressing CTRL+C
Finding some beer.....
Found first....
No Juopunutbear boot image found
Failed at (2.1) step....
Cannot enter JuopunutBear boot-mode
Quit....
Press ENTER to exit.....
手機螢幕必須顯示JupunutBear特殊界面 還有USB必須一直接上電腦~然後執行 controlbear.exe 你將會看到
Segmentation fault /system/bin/su -...
卡在這
顯示
========= ControlBear 0.11 beta for JuopunutBear S-OFF ==========
(c) Copyright 2012 Unlimited.IO
If you have acquired this software from anywhere
other than our website this version may be out of
date and unsupported. Please see our website for
instructions on how to use this tool and for support.
This program may not be redistributed or included in other
works without the express permission of Team Unlimited.
www.unlimited.io | team@unlimited.io
Starting up......
Connecting to device...
Testing ADB connection
Press ENTER to exit.....
請問有人知道甚麼問題嗎??
(c) Copyright 2012 Unlimited.IO
If you have acquired this software from anywhere
other than our website this version may be out of
date and unsupported. Please see our website for
instructions on how to use this tool and for support.
This program may not be redistributed or included in other
works without the express permission of Team Unlimited.
www.unlimited.io | team@unlimited.io
Starting up......
Connecting to device...
Testing ADB connection
Test 1: Rebooting into bootloader
Waiting fastboot (5/60)
Waiting.....
Test 2: Booting device into JuopunutBear boot-mode
Waiting ADB.... (7/60)
Test 2.1: Rebooting into bootloader
Waiting fastboot (3/60)
Waiting...
Waiting...
Waiting ADB.... (1/60)
Test (2.1): Booting FAILED (2)
Press ENTER to exit.....
請問有人知道這又是甚麼狀況嗎??
@@求解.......
內文搜尋
從 APP 打開
X