求GN 4.1.1 非原廠KERNAL推薦 (內也有N7 KERNAL推薦)

自從換成GN並升級到4.1.1後,
就一直使用原廠KERNAL,
以往在NS,需要刷KERNAL才能得到的效能與流暢性似乎已經不再那麼必要。

使用4.1.1到現在,
不可否認其原裝的KERNAL確實是相當的穩定,
從Status點進去看,開機時間往往都是一兩百的小時,
app裝的一樣多,但好像不怎麼需要重開機了。

在NS時代的時候一直跟著AIR KERNAL刷,
雖然他後來也有發表GN的KERNAL。

請問一下現在有在刷新KERNAL的大大,
可以推薦一下目前最穩定的KERNAL版本是哪一個呢?
JamesBand? 還是 milestone?
因為看了XDA討論之後還是有看到random reboot...等之類的問題,
看起來好像沒有原廠來的穩定!!


最想解決的問題是解鎖後滑動螢幕似乎都會頓頓的,
只有第一下,開始滑動之後這個現象就比較少,
再來就是偶爾程式間轉換會頓頓的。

謝謝
2012-09-14 13:32 發佈
T.S.H wrote:
自從換成GN並...(恕刪)


Clemsyn's Elite Kernel


建議這個降電壓版(第二樓), 雖然是降電壓版, 但卻有小超頻至1.5GHz, 小弟我刷了約1週, 很穩, 至今沒當過.


以下是超頻版核心特色 (overclock 至 1.8GHz)
=======================================================
The following are the difference with motley's kernel

1. JRCU is implemented
2. Lowest backlight setting set to 5 (save battery and better reading at night, if you have screen flicker issue it will be more noticable because of this so I suggest covering the ground pin of wifi)
3. Core voltage increased from 1200 to 1250mv on the high side to hit 1.7 frequency and 600 GPU but decreased from 950 to 900mv on the low side.
4. Increased CPU voltage to 1240mv for 1.7 frequency but allows decreased 750mv in low side
5. Increased GPU clock to 600 and pixclock increased (please let me know if you have problems on screen due to pixclock increase but so far no issues on testers)
6. Built using gcc 4.5.2 ( I know, I'm an oldie)
7. DVFS core table completely changed to allow max clock of host1x and pll_c and hit most max frequencies.
8. Enable Thermal_Sys to throttle at 68 (BTW, if you are using system tuner, the reading is +10 as per secret)


以下是降電壓版核心特色 (overclock 至 1.5GHz)
=======================================================
1. Vcore undervolted to 1.15 mv (default at 1.2) cpu mv at 1.15 mv running 1.5ghz
2. pll_c decrease from maximum (this was what was causing all the issue)
3. This kernel is set to 1.5ghz automatically. However if your ramdisk is programed to 1.3, then it boots to 1.3 intially. After pressing the power button once (or letting it sleep), it automatically resumes to 1.5 ghz without any CPU program.

I highly recommend that these settings be used for better battery life, LESS HEAT and power usage... Good for daily use


Hi, I am Joco!
jocoliu wrote:
Clemsyn's ...(恕刪)


另外再補充這個號稱是 N7 上最好的 ROM
小弟我還沒刷這版, 因為上一篇po的核心就已經不錯用了
XDA 原 post

特色如下
Some of the features this rom offer's|

*Glazed Mod's
*Beats Audio
*Sony Bravia Engine (As if the Nexus's Screen Wasn't Awesome Enough)
*SuperCharged
*Odexed
*Super Fast, Ask anyone using this rom.
*init.d Support, Many Tweaks with init.d
*Linaro Kernel (Motley's Kernel Version 1.0.8, Overclocked GPU)
*Optimized speed by modding the .so system
*Removed useless files not Needed
*AdBlocking Enabled
*Full Flash Enabled
*Camera Working + Camera App
*Choice of Launcher
*Theme Manager
*Beats Icon When Playing Music
*Smooth Scrolling Hack
*Volume Steps Hack
*Custom Animations
*Sysctl Battery Saving Scripts
*Fast bootup
*Custom Boot Animaton (Made by veeman from scratch)
*Volume Slider in Notification (Tablet Mode)
*Full Gapps (Log in by opening Play Store)
*SGT7 Status bar options
*Removed Useless stuff
*Custom wallpapers in wallpaper chooser.
*Modded some images for a crisper, sharper view.
*Many customizable options in the settings
*Mod's for better battery life
*Added a cool weather widget You know because ICS needs one.
*Removed boring JellyBean wall and replaced with one thats better (Screenshots)
*The List Is To Long To Mention Them All
Hi, I am Joco!
樓主不是問在 Galaxy Nexus 的 kernel, 怎樣一連串回了三篇 Nexus 7 的?

nekki wrote:
樓主不是問在 Gal...(恕刪)


Sorry! 沒看清楚! GN <> GN7
Hi, I am Joco!
我在GN上都一直使用Franco Kernel, 滿穩定的!!
感謝大家的熱心推薦,

已修改標題,分享給也想刷N7的朋友,

先來嘗試 Franco Kernel http://forum.xda-developers.com/showthread.php?t=1367341

想刷的可以一起刷看看!!

matika wrote:
我在GN上都一直使用...(恕刪)


用了幾個月 AOKP 現在開始會有點輕微的小頓。找時間換Franco Kernel看看。
別人錯了,不等於你就對了。
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?