我今晚換成CM7.1了~ 有支援繁中喔~ [女王把DHD擄走了, 叫我弄好liquid再給她]
MIUI 感覺光感應器有點問題, 在撥號模式下, 講完電話後, 會無法開啟螢幕切斷電話
or 開啟螢幕來撥分機也有問題
上面MIUI存在著光感應器的問題, microSD卡當USB隨身碟寫入似乎也怪怪的
加上半簡繁體, 感覺變成山寨機
所以再來體驗另一個有名的第三方ROM, CyanogenMod系列
CM7.1-1.05.26.11-RC1-Liquid
Wipe all before install it. Flash with malez recovery no sign check
- new sensors libs included. (compass not working and some problems with p-sensor)
- some kernel fixes
- based on cm sources
Download
http://www.multiupload.com/YWJFXUK49B
PATCHES:
OLDSENSORS (ACER SENSOR LIBS)
flash only if you want old acer sensors libs (compass working, some workarounds maybe are needed to get l-sensor and p-sensor working)
DON'T WIPE. Flash with malez recovery no sign check
Download
http://www.multiupload.com/A9T9M4U2C0
P.S. if you have problems with proximity sensor download Sanity from market.
BACK TO NEWSENSORS
Flash only if you have tried oldsensor patch (above) and you want to go back to new sensor
DON'T WIPE. Flash with malez recovery no sign check
Download
http://www.multiupload.com/6F09OTU66A
抓完後一樣放到microSD卡內
準備開工囉~
1.
按Volume Down + Camera + Power（振動兩下後放開，不能在接USB的狀態）進入HBoot模式
選擇recovery ===> 先做系統備份, 萬一變磚可以救回來
2. 備份完跑完之後, 按return 回到主目錄, 選flash ===> 進入次頁後有一堆flash選項, 選後面括號 (no sign) [第二個選項]
3. 選擇剛剛放到SD卡的ZIP檔 ===> 按HOME鍵 就開始執行刷機任務
4. 等刷機跑完 ===> 再刷第二個修正檔 OldSensorPatch-v3 (這裡都是選 flash no sign來刷)
5. ==> 跑完 ===> 再刷第三個修正檔NewSensorPatch-v1 (這裡都是選 flash no sign來刷)
6. return 回主目錄 ==> 選reboot 就完成重開機
7. 快樂的進入剛剛刷好的CM7.1 RC1 ROM [要稍微等開機, 第一次比較慢]
8. 恢復頻率: a. 在Market抓 CPU Boost Lite
b. 選擇頻率後, 把"Set on boot"打勾就可以在開機後恢復1G頻率了 [我測試耗電量還OK]
目前此版本還沒發現明顯問題, 歡迎版友服用
內文搜尋
從 APP 打開
X