abc2938 wrote:
步驟應該是不會錯 只...(恕刪)
USB偵錯好像要打開
也叫不出usb偵錯模式了!
我重複做了幾次,
發現拔電池重開後做起來不一樣,
不會timeout了,
但錯誤訊息是OSBL或FSBL is failed
畫面如下:
>> .bin Class is : A3
>> Read MgFl Header Ok!!
>> AMSS FileFlag : 63
>> OS FileFlag : 127
>> 請勿移除USB線, 直到程式出現可以移除USB線的訊息為止.
>> Download Process Started at AMSS mode.
>> Hex file Start
>> Hex file Succ !!
>> AMSS Start
>> AMSS failed...
>> Process finished. [Not Succ]
>> 最終結果 : Download流程失敗...
>> 更新程式結束, USB線可以移除了.
我武維揚 wrote:
對了，刷之前記得把U...(恕刪)
>> Read MgFl Header Ok!!
>> AMSS FileFlag : 63
>> OS FileFlag : 127
>> 請勿移除USB線, 直到程式出現可以移除USB線的訊息為止.
>> Ph's AMSS: A3-01.00.00
>> Ph's OS: 4.006.00_Acer_A3_EU_AAP-FET
>> Phone Class : A3
>> Nv Backup Start.
>> Nv Backup Succ !!
>> Cmd [OS => AMSS]
>> Wait UsbEvent [OS => AMSS]
>> No UsbEvent [OS => AMSS], Now quit process...
>> Process finished. [Not Succ]
>> 最終結果 : Download流程失敗...
第一次失敗
>> .bin Class is : A3
>> Read MgFl Header Ok!!
>> AMSS FileFlag : 63
>> OS FileFlag : 127
>> 請勿移除USB線, 直到程式出現可以移除USB線的訊息為止.
>> Ph's AMSS: A3-01.00.00
>> Ph's OS: 4.006.00_Acer_A3_EU_AAP-FET
>> Phone Class : A3
>> Nv Backup Start.
>> Nv Backup Succ !!
>> Cmd [OS => AMSS]
>> Wait UsbEvent [OS => AMSS]
>> AMSS Port Found!! : COM10
>> Hex file Start
>> Hex file Succ !!
>> AMSS Start
>> AMSS Succ !!
>> Cmd [AMSS => Fastboot]
>> Wait UsbEvent [AMSS => Fastboot]
>> Fastboot SN : JB0831B00110
>> Fastboot Start
>> Fastboot Succ !!
>> MoviDev is : 1
>> 即將進行MoviNand格式化, 請勿移除USB線與電池.
>> 可能需要5~10分鐘的時間, 請耐心等待.
>> Cmd [Fastboot => Recovery]
>> Can enter into Recovery mode for Format Process.
>> Format Process Timer : 10 sec
>> Format Process Timer : 20 sec
>> Format Process Timer : 30 sec
>> Movi Format Process Succ!!
>> Process finished. [All Succ]
>> 最終結果 : 全部的Download流程皆成功!!
>> 更新程式結束, USB線可以移除了.
不死心重開機再刷一次 成功
....目前有輸入法的問題...打不出中文...怎麼辦...
內文搜尋
從 APP 打開
X