tww wrote:
所以大大想再請問一下...(恕刪)
他不是提供 *.bin 檔案 無法使用 acer tools (假如我錯了 請指證)
下面是我常用的方法 (來自android liquid版)
How to install
-------------------------
Your current liquid android version is 1.6 (not 2.1)
1) Unpack the drivers.
If you have a 32-Bit version of Windows, go to the folder x86, if you have a 64-Bit version, go to the x64 folder. Then run the setup.exe and follow the instructions.
2) Unpack the Acer A1 Tool.
Run the ACER Download Tool. Click "Browse" and select the downloaded ACER_LiquidE...bin. Attach your Acer Liquid and press Start. It should start flashing the stock Éclair image.
Don't interrupt this process!!
Your current version is android 2.1
1) Unpack the Superboot.zip.
2) Boot your phone in normal mode and check that usb debugging is enabled in settings/Apps/Developpement
3) Reboot you phone is bootloader mode using reboot-bootloader-windows.bat" (windows) or launch "sh reboot-bootloader-linux.sh, or adb reboot bootloader
4) Run the "install-recovery-windows.bat" (windows) or "sh install-recovery-linux.sh" (linux)
This will install a custom recovery and reboot your device.
5) Wait until it's booted and then put our latest ROM .zip into the root of the SDCard. To access you sd card from your computer, slide down the notification bar and choose the appropriate item.
6) Reboot in recovery mode. Double-Click the file "reboot-recovery-windows.bat" (windows) or lanuch "sh reboot-recovery-linux.sh, or use "adb reboot recovery" (both)
Then wait until the device is rebooted into recovery.
7) Navigate to "apply any .zip from SD" and push the menu key, and then choose the ROM and press menu again. Wait for the installation to finish.
Reboot.
Congrats, you're done!
tww wrote:
所以大大想再請問一下
不能直接使用acer download tools 來刷這個ROM嗎
是要先經過那些步驟嗎
如果方便 可以請您詳細的說明一下過程嗎
還是說有詳細的安裝說明連結可以提供給小弟我嗎
感激不盡
...(恕刪)
您好...
首先超感謝twnrsworld大大...
他提供的方式真的超讚...
在下作法是:
1.先取得手機ROOT
2.利用acer download tools 先刷成2.1版
3.再到market下載quick boot..
4.將Liberated_v1.1.zip copy到sd卡的根目錄下.
5.利用twnrsworld大大的方式完成malezRecovery的安裝..
6.利用quick boot進入手機的recovery模式中..
7.選擇使用sd卡中任意zip進行升級..
8.選擇Liberated_v1.1.zip
之後就會開始升級.
升級完畢後就會重開機..
之後..就大功告成了...
今天試了一個晚上...
看到成功的畫面..
真的很感動...Q_Q
我的相本:http://picasaweb.google.com/musicglobe
tww wrote:
想請問一下樓上大大 ...(恕刪)
http://www.mobile01.com/topicdetail.php?f=221&t=1489985&p=1#18507389
就是這個..
上一頁的事而已...XD
主要就是把原始原文教學中的malezRecovery的部分簡化完成..
不過那個"malezRecovery_2.1-0.1.img"
必須google一下..另外下載喔...^^
我的相本:http://picasaweb.google.com/musicglobe
tww wrote:
所以說是先在1.6取...(恕刪)
是的..
在下是先在1.6取後root後..
再刷2.1..
然後再安裝malezRecovery
完成Recovery後就可以升級了...
不過目前看來還不是佷穩定..
除了有時候會突然變慢外..
語音辨識也只聽的懂英文...Q_Q
最好的..還是希望官方能快點把正式版的2.1放出來
然後請問一下..
那裡可以捉的到Acer_Liquid_2.000.15_AAP_FET這個版本的rom呢?
想2.1嘗鮮過後..
也要先刷回來1.6..
然後等官方版的rom放出來時再正式升級了..
我的相本:http://picasaweb.google.com/musicglobe
內文搜尋
從 APP 打開
X