• 45

[分享] SMC IP PBX 交換機及網路電話實作 (2012/12/14更新)

pctine wrote:
username: ...(恕刪)

我從 "SIP註冊"設定,修改 "SIP註冊伺服器"之IP,會出現要輸入"管理密碼"小視窗.我輸入"168168"沒用??
另外,我沒有看到有可以輸入"username"的位置??

pctine大,

fxo直接接市話
沒有使用voice gateway

nowin wrote:
我從 "SIP註冊"...(恕刪)


你應該用 PC 的 ie 進去設比較快.
FB: Pctine
pctine wrote:
你應該用 PC 的 ...(恕刪)

從 WAN or LAN端 使用 Web login 均失敗.ID改用大寫也不行??

出現錯誤訊息--wrong UserName or Password
pctine大,

2個分機使用eyeBeam互撥
影像的部分還是跑不起來



eyeBeam 的log如下

21:09:38.6
SENDING TO: 192.168.3.50:5678
INVITE sip:8002@192.168.3.50:5678 SIP/2.0
Via: SIP/2.0/UDP 192.168.3.19:6216;branch=z9hG4bK-d87543-da2b5002c4333d42-1--d87543-;rport
Max-Forwards: 70
Contact: <sip:8001@192.168.3.19:6216>
To: <sip:8002@192.168.3.50:5678>;tag=etx0602edd1
From: "8001"<sip:8001@192.168.3.50:5678>;tag=b70e177d
Call-ID: 415feb40eb63db66@bTQ.
CSeq: 4 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
Content-Type: application/sdp
Proxy-Authorization: Digest username="8001",realm="etxpbx",nonce="53829d06",uri="sip:8002@192.168.3.50:5678",response="c137b51cc484b150ee9e642c40691db5",algorithm=MD5
Supported: eventlist
User-Agent: eyeBeam release 3010n stamp 19039
Content-Length: 239

v=0
o=- 522820472 522914050 IN IP4 192.168.3.19
s=eyeBeam
c=IN IP4 192.168.3.19
t=0 0
m=audio 6218 RTP/AVP 0 18 8 3 101
a=alt:1 1 : 6DA73E3E 000000FF 192.168.3.19 6218
a=fmtp:101 0-15
a=rtpmap:101 telephone-event/8000
a=sendrecv

21:09:38.6
RECEIVING FROM: 192.168.3.50:5678
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.3.19:6216;branch=z9hG4bK-d87543-da2b5002c4333d42-1--d87543-;received=192.168.3.19;rport=6216
From: "8001"<sip:8001@192.168.3.50:5678>;tag=b70e177d
To: <sip:8002@192.168.3.50:5678>;tag=etx0602edd1
Call-ID: 415feb40eb63db66@bTQ.
CSeq: 4 INVITE
User-Agent: ETX IP PBX 1.6.1312 (OS 1.0.60(1))
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, SUBSCRIBE, MESSAGE, INFO
Contact: <sip:8002@192.168.3.50:5678>
Content-Type: application/sdp
Content-Length: 260

v=0
o=root 7983 7985 IN IP4 192.168.3.50
s=session
c=IN IP4 192.168.3.50
t=0 0
m=audio 10528 RTP/AVP 0 18 8 3 101
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:3 GSM/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16

21:09:38.7
SENDING TO: 192.168.3.50:5678
ACK sip:8002@192.168.3.50:5678 SIP/2.0
Via: SIP/2.0/UDP 192.168.3.19:6216;branch=z9hG4bK-d87543-5236463dd9694441-1--d87543-;rport
Max-Forwards: 70
Contact: <sip:8001@192.168.3.19:6216>
To: <sip:8002@192.168.3.50:5678>;tag=etx0602edd1
From: "8001"<sip:8001@192.168.3.50:5678>;tag=b70e177d
Call-ID: 415feb40eb63db66@bTQ.
CSeq: 4 ACK
User-Agent: eyeBeam release 3010n stamp 19039
Content-Length: 0


8823 wrote:
pctine大,2個...(恕刪)


請貼一下 eyebeam 設定畫面 video codec 的選項畫面. tks.
FB: Pctine
pctine大,

eyebeam 設定畫面 video codec 的選項畫面如下 :




nowin wrote:
我從 "SIP註冊"...(恕刪)
eyeBeam 1.1 3010n stamp 19039

8823 wrote:
pctine大,ey...(恕刪)


請問一下你的 eyebeam 版本為何? 我測試的版本為 eyeBeam 1.5.20.2 build 59031
FB: Pctine
pctine大,

看起來是版本的問題
更換為eyeBeam 1.5.20.2 build 59031後video call即可成功
  • 45
內文搜尋
X
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 45)
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?