s22037816 wrote:
這顆power是2011/07/11買的 今天有打電回去視博通詢問
客服人員叫我再拿一個power作交叉比對
還是我就直接寄給視博通叫他幫我檢測?
叫你交叉比對有用嗎? 你有夠精準的儀器嗎?
難道還要再打壞零件才知道正不正常嗎?
你直接寄給全漢比較快，註明"易打壞零件"。
s22037816 wrote:
上星期才剛壞掉一張顯...(恕刪)
當初我m4有過無法偵測到的經驗
美光的技術人員是給我以下的修法
我想m500系列應該也可以試試看
Micron/Crucial 技術人員有說重設Power Cycle就能再偵測到m4
1) m4 SSD只插電源線 開機後閒置20分鐘 建議閒置不要使用電腦
2) 關機然後m4 SSD電源拔起30秒
3) 再重複步驟1-2最少一次
4) 把SATA線插回 正常開機 m4 SSD應該就能偵測到了
原文如下
"In most cases, your SSD can be returned to normal operating condition by completing a power cycle. The process will take approximately one hour.
We recommend you perform this procedure on a desktop computer because it allows you to only connect the SATA power connection, which improves the odds of the power cycle being successful. However, a USB enclosure with an external power source will also work. Apple and Windows desktop users follow the same steps.
1. Once you have the drive connected and sitting idle, simply power on the computer and wait for 20 minutes. We recommend that you don't use the computer during this process.
2. Power the computer down and disconnect the drive for 30 seconds.
3. Repeat steps 1 and 2 at least one more time.
4. Reconnect the drive normally, and boot the computer to your operating system.
5. If the latest firmware has not been updated to your drive, do so. Go to Crucial.com Product Downloads - Firmware Updates for our firmware updates.
A laptop computer will also work, but you’ll have connect the drive and navigate to the systems BIOS menu. (Please refer to your system manufacture’s documentation on how to access the BIOS.) Allowing the drive to sit in the BIOS will improve the odds that the power cycle will work. For laptops, we don’t recommended using a USB enclosure powered via USB. In addition, Apple users must hold the Option key while they power on the system (with the SSD installed). This will boot the Mac to the Startup Manager screen. The Startup Manager screen works like the BIOS screen on a laptop, in that it gives the drive power without any data throughput.
1. Laptop users will need to be in the BIOS menu, or Mac Startup Manager as stated above. The computer will need to stay powered for 20 minutes. We recommend you don’t use the laptop during this process.
2. Power the computer down and disconnect the drive for 30 seconds.
3. Repeat steps 1 and 2 one more time.
4. Reconnect the drive normally, and boot the computer to your operating system.
5. If the latest firmware is has not been updated to your drive, do so. Go to Crucial.com Product Downloads - Firmware Updates for our firmware updates."
官方給的數值應是算保守了
可以自己使用鉤表量一下電流，真的沒有吃很大....
參考一下，舊電腦的耗電量
CPU：AMD Phenom II X3 710 1.1625V 2600mhz
MB：ASROCK M3A780GXH128M
RAM：金士頓 DDR3-1333 4G*4
HD：WD 黑標 640G、WD 紅標3TB、日立 2TB 7200轉
顯卡：MSI R6850 Cyclone 1GD5 Power Edition/OC 675mhz/1075mhz
螢幕：CHIMEI 22GH
FAN：TR-FDB-12-1600*3 5V*2 7V*1
POWER：HIGH POWER HPC-400-102，400W電供
平常使用：137W~140W
影片：720P動畫：140W~147W
1080P：155W~160W
BF4：220W~230W，沒開特效
我有用K10stat調整電壓可以多少省一下電費
硬碟如果一點只有一顆也可以省下一點
總之，真的沒有那麼耗電，買太大的電源也只是浪費...
真的有吃那麼多電想必在帳單也可以明顯的看出來
最近看到版上的省電組合文章20W~50W，頗心動...
內文搜尋
從 APP 打開
X