sopp0820 wrote:
手寫新版也是要按著左...(恕刪)
舊版手寫板並不支援WIn8專有的姿勢.原有支援的姿勢在Win8下可能還可以用. 以下是logitech的回答:
http://forums.logitech.com/t5/Mice-and-Pointing-Devices/Anyone-tried-older-Wireless-touchpad-on-Win8/td-p/901790
Hi andyo,
I see that you were wondering if the Logitech Wireless Touchpad works on a Windows 8 computer. The Logitech mice and keyboards are Human Interface Devices (HID). HID drivers are native to modern Windows operating systems, enabling basic functionality.
The Wireless Touchpad and the K400 are on the Windows 8 product support and device compatibility list, his means that it should work properly on a Windows 8 OS.
Please keep in mind that the Wireless Touchpad doesn't support the Windows 8 specific gestures and touch features, but there's a high probability that the touch gestures designed for the Wireless Touchpad may work. And that the only touchpad gestures that the K400 supports is the two finger scrolling and tap to click. Therefore this could be only features supported, once SetPoint is installed.
Hope you find this information useful, and keep on enjoying Logitech's Mice and Keyboards.
Paulina
Logitech Support Specialist
jaschiu wrote:
舊版手寫板並不支援W...(恕刪)
實際上只差了邊緣的動作.. 有空我借到朋友的再來拍影片.
也就是上摳 下摳 左摳 右摳邊緣的動作
其餘動作都支援.
如果不裝setpoint 的話是只有基本的動作 就如t650一樣
如我文章一開頭所說的t650不裝setpoint 點擊及手勢都沒有
在11/2號左右放出了新版setpoint又讓這舊款變成有支援了,也可以自訂動作了
本周又更新了一版..
英文客服的服務能力還是看看就好
光看看這篇t650就知
http://forums.logitech.com/t5/Mice-and-Pointing-Devices/T650-right-mouse-button/td-p/912242
我之前也問過英文客服有關於tap 左鍵拖曳的功能tap and hold 或者說click and drag但英文原廠客服回說我們沒有這功能
請用mouse...後來一堆人問後變成有這功能
英文客服為加州 沙加緬度一家客服公司外包的,不用太期待
p.s 最新一版setpoint t650 主要有修正edge 邊緣動作的範圍. 下一版可能可以自訂 目前如果覺得太寬或太小 只能自己去改registry.
前一版的觸發範圍太寬 尤其是右邊. 會造成tap 右下角的動作有問題. 及不小心觸發 win8右邊選單的麻煩.
內文搜尋
從 APP 打開
X