Qnap如何手動設定路由器

要先進到 TP-LINK TL-R860 內的設定, 將 UPnP 的預改值由 Disabled 改成 Enable後,再回到你的NAS做自動設定路由器.

底下是TL-R860 的使用手冊(上官網自行下載來看),Page 27有寫到:

http://www.tp-link.tw/products/details/?model=TL-R860#down

4.6.4 UPnP
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet
computers, to access the local host resources or devices as needed. UPnP devices can
be automatically discovered by the UPnP service application on the LAN. You can
configure UPnP on this page that shown in Figure 4-22:

Figure 4-22 UPnP Settings

¾ Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or
Disable button. As allowing this may present a risk to security, this feature is
disabled by default.
¾ Current UPnP Settings List - This table displays the current UPnP information.
• App Description – The description provided by the application in the UPnP
request
• External Port - External port, which the router opened for the application.
• Protocol – Shows which type of protocol is opened.
• Internal Port - Internal port, which the router opened for local host.
• IP Address - The UPnP device that is currently accessing the router.
• Status - Either Enabled or Disabled, “Enabled” means that port is still active.
Otherwise, the port is inactive.
Click Refresh to update the Current UPnP Settings List.