[問題]官網出現新FW~但機器裡面檢查卻說沒有~

小弟NAS TS-469L 跑的是4.0.2
昨天心血來潮去官網看看有沒有新東西的時候發現QNAP官網有出現4.0.5 Build 1023的新韌體~
因為機器沒有顯示可以更新所以就不敢下手更新~
有沒有人知道這樣的情況嗎?



LOG是說:

TS-469 Pro/469L
4.0.5 Build 1023
163.9 MB 2013/10/25

Notes :
[Official] QTS 4.0.5 build 1023 SMB for TS-x69, x70, x79 series

[Change log]

[Enhancement]

1. Legacy volume capability enhancement
2. Some minor translation errors
3. Enhance SMART temperature compatibility
4. Enhance QPKG installation compatibility



[Bug fixed]

Fixed - Upgrade from 3.8.3 to 4.0.4, RAID 10 shows Not Active，but data can be accessed

Fixed - Network port mapping

Fixed - Create block-based LUN，switch to storage pool will show Free size -1

Fixed - TS-469L NAS icon can not display on Chassis View

Fixed - Upgrade from 3.8.4 to 4.0.4, deleting legacy volume takes long time

Fixed - Disk should can be back to normal state after bad block scanning

Fixed - Error Log shows "Examination failed(Cannot unmount disk)" by Volume

Fixed - Encryption key File can not unlock Encryption Volume that been created from Soho firmware, after update to SMB v4.0.4

Fixed - Lost iSCSI connection in XenServer when upgrading from 3.8.4 to 4.0.4

Fixed - System migration issue

Fixed - Unexpected occasional reboot in some condition

Fixed - Xenserver iSCSI compatibility improvement

Fixed - Specify 2+ layers depth of path for Shared Folder, Shared Folder UI view incomplete

Fixed - Kernel crash after remove SAS cable and then remove iSCSI LUN which is initializing

Fixed - Cannot connect to Time Machine server using OSX 10.9

Fixed - Can use USER account to connect AFP

Fixed - [ WD10JFCX ] TS-1679U Rapid Test result: Fatal or unknown error (SMB)

Fixed - Speed down for ICRC error, Disparity and 10B8B error

Fixed - When HDD is in self test mode, retry 10 times if get HDD S.M.A.R.T fail

Fixed - Fix the long SATA resume time

Fixed - Fix SSD in PCH sometimes negotiate speed is 1.5G when plug out then plug in.