• 9

[分享] DIY NAS 分享 (7/9更新)


forway wrote:
請問使用 Win7 OS 來當 NAS, 那是使用遠端連線的方式進行遠端控制嗎?

如果是這樣, 那安卓手機裝上遠端控制軟體後是否可以一樣做到遠端控制的功能?

謝謝!

可以,這當然是可以。

遠端連線軟體可以考慮有免費版的Wyse PocketCloud(RDP) 和 Splashtop ,後者的效果非常不錯。

forway wrote:
請問使用 Win7 ...(恕刪)


利用手機 Remote desktop app 去連線 windows 7 PC 是可行, 但一般 PC 的螢幕解析度很高, 對應到手機那麼小的畫面, 實際上是很難操作的, 所以透過手機去連線 PC or NAS, 應該儘可能安裝其他的軟體來取代, 例如需要播放 PC 上的多媒體影音, 或許安裝 Plex media server, Twonky server, Polkast 這些是比較好的選擇, 而需要存取上面的檔案, 建議透過 ftp or samba 來連線.
FB: Pctine
呼叫 P大: 不知道您的軟體這塊有著落了否?相信好多NAS同好都在等您指導哩.(其實是想拷貝) .
話說,我的p42st30W 不認得 D410內的一堆影音檔格式,所以想裝個HTPC來用用.不過不想跑 微軟的,太容易弄死了.想裝freenas 當DS410的備份.不知道是否還可以變成 蘋果/安卓 的串流伺服器呢?
網路成癮患者啦

yuhdiing wrote:
呼叫 P大: 不知道...(恕刪)


不好意思, 現在才回, 後來小弟放棄了, 組好的電腦就擺著. 不過前面很多網友分享更精彩的內容, 也列出所需要的軟體.
FB: Pctine
今天看到原價屋有賣一張 MSI C847IS-P33/Mini-ITX 主板, 內含 Celeron 847 Dual-Core CPU & 主板.

網友分享

比較可惜的是不支援 USB 3.0, 而 SATA Port 只有兩個. 但優點是省電且效能也比 Atom 好很多. 想要自組 NAS 的網友可以考慮看看.

ps: ECS 也有採用 NM70 chipset 的主板. SATA port *4, 價格大致相仿. (ECS NM70-I)
FB: Pctine
今天看到網拍一款小型 Server 專用的機箱, 蠻適合 DIY NAS 的玩家.

勤誠 SR30169.

youtube 介紹影片

原廠連結

採用標準規格的 Power Supply, 含四個 Hot-Swap Tray. 價格上也還蠻 ok 的.

(取自網路)
FB: Pctine
我對1F的機殼相當有興趣 不過好像找不到了

alwayssmileruten wrote:
可以,這當然是可以。...(恕刪)


收藏一下
樓主可以參考看看國外的報告
但請注意
有些版本已過舊
像FreeNAS已到版本8了
5 Free or Open NAS Servers

這是FreeNAS8的功能解說

http://www.freenas.org/category/version-comparison
版本7和版本8的差異性

這是 NAS4Free Project
NAS4Free is an embedded Open Source Storage NAS (Network-Attached Storage) distribution based on FreeBSD. This project is a continuation of FreeNAS 7 series project.

關於FreeNAS和NAS4Free的正統之爭:
Some users assume that NAS4Free is a “fork” of FreeNAS. This is absolutely NOT the case.

NAS4Free is the direct continuation of the original FreeNAS code that was under development from 2005 till 2011 under the name FreeNAS.

After the FreeNAS name was legally acquired by iXsystems, Inc. (year 2011), the code was unable to be developed any longer under the same name, and a name change was necessary. The founder of FreeNAS (Olivier Cochard-Labbé) did donate the original FreeNAS code to our project. IXsystems no longer wanted us to release new builds under the FreeNAS name, so the only option was to leave the FreeNAS project after so many years.

At the time we began publishing the new name. Many necessary updates were done, including upgrading the base system. NAS4Free went up from FreeBSD 7 to the FreeBSD 9.x releases, allowing support for a lot of newer hardware too. NAS4Free now also includes support for the latest Intel Atom based processors. This includes great advances in ZFS version support as well. These changes should vastly increase our ability to offer you an even better NAS system than ever before.




不建議自己編linux kernel
自己編kernel是可以有很大的樂趣與控制
但一個人孤軍套戰
是不可能勝過一整個group的
  • 9
內文搜尋
X
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 9)
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?