• 4

QNAP QTS 4.2.1 正式版討論

boren wrote:
感謝兔兄解說,奇怪的...(恕刪)

我也是升級後遇到這個問題
missing bridge support可能和PYTHON3衝突
http://www.mobile01.com/topicdetail.php?f=494&t=4661059&p=1#58813465

目前我的QTS和Container Station都可以正常開
你的Container Station目前還是只能分頁開啟嗎?
Qnap的轉址失效前都可以在本頁開
Qnap的轉址恢復後現在都只能在分頁開(剛又再試了一下,2台只能在分頁開,1台可以在本頁開)

我有一台PYTHON3移掉還是missing bridge support所以我的應該不是衝突問題
後來是reset3秒 再重裝Container Station就好了


20160430
今天台電跳電重開機,結果又都只能在新分頁開了

achan2003 wrote:
missing bridge...(恕刪)

boren wrote:
我把警戒關掉後,經過...(恕刪)


我的TVS-671昨天升級4.2.1後也發生了這個問題



經詢問QNAP後,可照著這網頁做就可以排除了!
原因是因為升級4.2.1後,會自動啟動監控pool使用率所造成的,照網頁的方式設定則可騰出一些空間,就不會因為volume+snapshot占滿整個pool而發出警告了。



感謝QNAP每次都親切專業又迅速的回答
Give me what I could never ask for...
未配置空間又有bug 了
之前按樓上說法,成功取消保留區塊,不再出現問題了。
但是
最近更新了一些app之後, 慢慢的已配置空間被擴充了,也不是被池用掉,就平白無故消失被配置用掉了,我已經沒在用快照了,感覺就像快照被打開,但是控制面板管理不到。
現在又炸了

官網已提供 4.2.1 2016/06 新版本.

TS-253A/TS-453A/TBS-453A/TS-653A/TS-853A/
2016-06-02
4.2.1 build 20160601
QTS 4.2.1 Build 20160601

[Bug Fixes]

- Fixed an issue where Snapshot Manager would get stuck when loading a volume that contains more than 80,000 folders.
- Fixed an issue where a NAS would randomly reboot when migrating VMs from one LUN to another in ESXi.
- Fixed an issue where users would be unable to set Windows ACLs after updating QTS to version 4.2.1 (build 20160419).
- Fixed an issue where external device backup jobs created in Backup Station would disappear after updating QTS from 4.2.0 to version 4.2.1.
- Fixed an issue where backup jobs would fail to back up encrypted folders on the NAS to external devices (but the job status would show "finished").
- Fixed an issue where users would be occasionally unable to rename folders on the NAS using Safari on a Mac.
- Fixed an issue where the NAS would get stuck on the "loading data, please wait…" message when opening "Control Panel" > "Network" after a router was set to block Port 80.
- Fixed an issue where users would be unable to log in to QTS using Safari’s Private Browsing window.
- Fixed an issue where the NAS would fail to detect snapshots containing volumes that are more than 20TB in size.
- Fixed an issue where subdirectories within aggregated folders on the NAS would become inaccessible using Samba (File Explorer) in Windows 10.
- Fixed an issue where an rsync backup job would fail when backing up Container Station’s data folders.
- Fixed an issue where accessing folders on external devices using File Station would fail after setting folder permissions for those folders.
- Fixed an issue where Excel files stored on a NAS could not be concurrently opened by multiple Mac users if these files are already opened by a Mac user.
- Fixed an issue where RTRR jobs would fail if more than 132 job instances are concurrently executed.
- Fixed potential CGI vulnerabilities. Users are advised to upgrade their NAS firmware with this release.
FB: Pctine

pctine wrote:
官網已提供 4.2...(恕刪)


pctine大大

借問一下,我有一台 TS-239 Pro II+ 也升級到qts 4.2.1了,

整個系統重置,也看不到快照功能,是没有支援嗎? 都没看到有相關訊息 @@"

lanworld wrote:
借問一下,我有一台 TS-239 Pro II+ 也升級到qts 4.2.1了,
整個系統重置,也看不到快照功能,是没有支援嗎? 都没看到有相關訊息 @@"..(恕刪)


如果沒有就是不支援.廠商可能沒有打算下放給舊機種吧.


FB: Pctine

pctine wrote:
如果沒有就是不支援...(恕刪)


是喔@@ 我以為有支援update到4.2.1

就同時都會有那些功能才對....

改天有空來寫信問一下qnap的客服好了 !

謝謝回應~
  • 4
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?