家裡的電腦裝完dvd 燒碟機, 電腦開機後出現藍色畫面, 怎麼辦 ?
裝完後, 入到 windows 2000 professional, 但放dvd 碟入去, 看不到.(同時安裝了1394 card. 但仍未裝上附上的software). 同時又有另一件事, 在電腦右下角有個符號, 說找到新驅動程式, 跟住照做, 問我是否重新開機, 我沒有(因為仍有其他事在做).
因上次裝 usd2.0 card後, 電腦沒什麼反應, 但將 hardisk 的ide cable 的插頭弄緊一些就ok, 所以今次照做, 因為太迫的位, 將hardisk取出再插. 但進入到window 一半, 出現藍色畫面 :
..................kmode _exception_not_handled
if this is the first time you've been this stop error screen, restart your computer. if this screen appears again, check to be sure you have adequate disk space. if a driver is identified in the stop message, disable the drivers or check with the manufaction for driver update. try changing video adapter.
check with your hardward vendor for any bios update;. disable bios memory options such as caching or shadowing. if you need to use safe mode to remove or disable components, restart yoru computer, press f8 to select advance startup option and then select saft mode.
我不太懂電腦知識, 不過都去了bios 嘗試修改一些無關重要的數據, 但發覺再開機一樣回復先前設定(我肯定有save).
有人建議用軟碟開機, 但我不知如何用.
我嘗試去safe mode (在四個角有顯示), 出了 c:/document and setting/..
請問應該如何做 ?
請各位大大幫幫忙. 究竟是我的hardisk 死了, 還是1394 card 連累我 ?
mainoard socket 423 pentium 4 1.5g 400mhz
(this mainboard has the via vt8753 northbridge and vt8233 southbridge chipsets that support ac 97 audio codec ....)
