各位可看一下，破九千
對照一下，之前的m.2 ssd就可以看到速度提升3倍之多
各位可看一下，破九千
對照一下，之前的m.2 ssd就可以看到速度提升3倍之多
各位可看一下，破九千
對照一下，之前的m.2 ssd就可以看到速度提升3倍之多
2019-12-29 21:53 發佈
=================
軟體RAM快取有多大，你的資料風險就有多大。。。。我個人是會找內建的硬體快取。
不過，如果可以限制只用在READ而不是WRITE/MOVE/DELETE上，破壞資料的風險就會降低，那可以試試。
值得注意的是，AMD StoreMI加速技術只支援256GB或以下的SSD容量，建議1TB或以下的HDD搭配128GB SSD，如多於1TB的HDD則搭配256GB SSD，以達到最佳加速效果。此外，如可以合併的硬碟組合多於一個，軟件則會讓用家自由選擇合併哪些硬碟，之後等待軟件完成合併分層並重新啟動電腦。
==================
AMD StoreMi有趣的是可以只限硬碟互搭，但很顯然的一堆但書，表示這不是小屁孩可以無腦使用的家私。
laevatain wrote:
StoreMI有一點(恕刪)
Uninstalling StoreMI Software
A StoreMI system reformats the Windows raw disks in order to function properly. Once formatted,
there is no supported way to revert back to the original boot drive as the data is spread across
multiple drives.
Completely uninstalling the software is therefore not possible for bootable StoreMI TierDrives
without utilizing a third-party OS migration tool.
StoreMI may be uninstalled using standard Windows uninstall options via the setup or control
panel. However, special steps are required if the StoreMI is a boot drive.
Step 1a: Backup or migrate any important data currently stored on the StoreMI drive to a
separate disk drive using a commercially available data migration tool. Another blank hard disk
or SSD attached to the system SATA controller is highly recommended for this step NOT a USB
drive as we will need to be able to boot from this drive in later steps (unless the USB drive is
transferable to the motherboard SATA ports).
OR
Step 1b: If using a 2-drive StoreMI configuration, convert the system to a single disk using the
StoreMI Remove StoreMI option. This will free up the SSD which may be used to clone the
StoreMI contents to. Note, check there is enough room for the OS to fit on the SSD before
performing this operation.
Step 2: Boot the system from the migrated disk created in step 1a or 1b. Check the boot drive is
operating as expected and the StoreMI is no longer the boot drive.
Step 3: Click on the Windows icon, type “StoreMI” to search for the AMD StoreMI utility and
run the utility
IMPORTANT: The following step will erase all data from the StoreMI:
Step 4: Select “Change Settings” then “Delete” to remove the StoreMI, free the original drive(s)
and make them usable by Windows.
Step 5: Uninstall the AMD StoreMI software from the cloned boot drive.
The system will no longer contain any StoreMI TierDrives.
使用說明書要先看一下，才不會無腦使用
內文搜尋
從 APP 打開
X