前幾天故障無法使用進入主畫面要用密碼也無法加入新手紋,昨天把螢幕面板上方和下方適當的敲一敲,太大力怕把螢幕敲破。
結果可以使用了但是不像之前馬上可進入主畫面,變秀逗秀逗時好時壞。ip6是美國親戚送的。
我是iPhone 5S, 因為電池衰退就嘗試自己買電池來換,
換的過程中有拆掉Home鍵的排線,
把新電池接上去後,再把Home鍵排線接上去,
結果開機後,Touch ID 就顯示失敗了
試過重開機、強制關機、把Home排線重插,結果都沒用....
後來在Apple論壇看到一則留言,有談到解法,貼在下面:
https://discussions.apple.com/thread/6537493?start=45&tstart=0
stephenfromcleveland
May 7, 2015 7:47 AM
Re: Touch ID iPhone 5S Failed
in response to RoMyo Ahmed
This is generally an initialization issue. If you replace the digitizer/LCD assembly. you need to disconnect the battery when reconnecting the fingerprint sensor/home button. This powers off the device and allows it to cold boot after the repair. It will then initialize the fingerprint sensor. If the battery is not disconnected and the FPS is connected it may not initialize resulting in this error. Perform the repair following these steps.
1. disconnect the lcd/digitizer/fps assembly
2. remove battery power cable cover
3. disconnect battery
4 reconnect battery after a few seconds(DO NOT POWER PHONE ON or touch home button)
5. reconnect lcd/digitizer/fps connections
6 power on phone
7 test
8 final screws
大意就是說,要先把所有裝置的排線先接好,再把電池接上,裝置才能正確初始化。
所以我又把電池排線拆下來,先插Home鍵排線,再把電池排線鎖上去....
這需要一點技巧,因為Home 鍵排線插上後,就只能留下一小個縫來鎖電池排線,
鎖完後重開機果然就好了
所以如果有遇到類似情形又過保了,可以試試看,
拆機工具組去買顆電池就有附了,很便宜
內文搜尋

X