有人知道條碼設定在台灣一些各大店家要調哪種設定嗎?
好像不能全部都條OTHER 有些條碼都不會對耶~會刷不出來
譬如我在"小7"有朋友上班我就過去輸入了很多種條碼大部分13碼的話
只要輸入後出來的圖片跟商品一樣就刷得出來
但是有些譬如8碼的商品設定出來後條碼就跟商品的不一樣了刷起來就會錯誤
家X福的卡現在設定是卡片條碼跟IPHONE設定條碼一樣
但屈X市的條碼就不知道該如何設定了~
設定為OTHER的都是不正確的刷不出來~
有人知道英文設定選項該設定哪種的嗎?
我將卡片（屈臣氏）照起來寄給作者
他很用心的回覆給我了
大家可以參考一下
意思應該是改成EAN 13 這個格式 然後前面加上27這樣
不過能不能夠正常work我就不確定
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Thank you for your request to add Watsons and your sample image. After taking a look I was able ot verify the barcode and its symbology. In your case the card should be input manually. When you input your card under the Advanced settings be sure to set the "Symbology" to "EAN 13". Also, when you input your digits associated with your barcode be sure to include the numbers "27" in front of your actual numbers ( so input 270202675132). Until we get another card sample from another user we cannot assume this "27" prefix is universal but for your case it is as described above. Please let me know if you have any further questions and also be sure you are following all our Tips for Scanning Success, which include:
1) Make sure the screen is free of dust and fingerprints. The screen MUST be clean in order to scan properly.
2) Keep the screen just shy of perpendicular to the scanner and hold the barcode image steady (don't wave around).
3) Hold the screen approximately 5-7 inches from the scanning device.
4) Keep the screen in a vertical (portrait) orientation. Only use horizontal (landscape) orientation when the barcode is too wide to display otherwise.
5) Set your screen brightness to 80% or higher for best scanning results.
6) Avoid screen protector covers which can hinder the laser from reading the barcode off the screen. Some screen protectors can work fine and not hinder the scanning process. If you are looking for alternative screen protectors try types that are listed as "clear", such as PowerSupport Crystal from apple.com, ScreenGuardz Ultra-Slim, and Ultra clear full from HDAccessory.com
7) Avoid flatbed scanners which can be problematic for scanning off of phones. Instead stick to handheld scanners which allow the laser scanner to read effectively off the phone screen. NOTE: some users have reported successful scanning off of flatbeds but only under very specific circumstances so its easiest to stick to handhelds.
Hope this helps and thank you again for your request!
-Sashont
內文搜尋
從 APP 打開
X