如題，老人家年紀大了，說明書翻遍了卻找不到，煩請各位好心的大大指教，感恩啦!
oleghuang wrote:
依照您指示的說明檔來...(恕刪)
下載ISO檔燒成光碟後，確認裡面是否有三個檔案：
DLfile.pkg 95.3Mbyte(99,942,480byte)
DLdiscidentifier.txt 93byte
DLdiscidentifier.txt 93byte
確認無誤後，再把光碟放到BDP-51FD做更新，必須在主機上操作，不可使用搖控器操作退片等功能，
整個更新過程約10-20分。
其他你自己再慢慢看！
- Use the front panel buttons to carry out all actions. DO NOT use the remote control buttons.
- The update process can take anywhere from 10 to 20 minutes.
- The disc tray will open during the updating process, so if you have your player in an enclosed space (i.e. an entertainment center), be sure to allow enough space for the disc tray to open without bumping anything.
- DO NOT touch the disc tray or the disc until the update has finished.
- If you have any problem during the update process, please refer to the firmware update FAQ included in this document or you can call Pioneer Customer Support Center. Toll Free in USA 1-800-421-1404
1. Press the "STANDBY/ON" button to switch the unit on.
2. Press the "OPEN/CLOSE" button to open the disc tray.
3. Place the UPDATE disc you created on the disc tray.
4. Press the "OPEN/CLOSE" button on the front panel to close the tray.
"DISC-DWLD" will appear on the front panel display of the player.
WARNING!!
DO NOT unplug the power cable and DO NOT press the "STANDBY/ON" button until the unit switches into standby mode as described in step 6. Doing so may result in your player becoming unresponsive and will then need repairs. Please continue to step 5.
5. After a few minutes the messages (DOWNLOAD, etc.) will appear on the front panel display of the player.
Note that from this point, the update process can take from 5 to 15minutes.
6. The disc tray will open and the message "DOWNLOAD OK" will appear on the front panel display for a few seconds after the firmware update has finished. The unit automatically switch into standby with the disc tray remaining open and the lights on the front panel will be off.
7. Remove the UPDATE disc from the disc tray.
8. Press the "STANDBY/ON" button to switch the unit on.
9. Check the firmware version (see section A).
If the version has not been upgraded to 1.21 then confirm that the files on the disc are the correct ones as described in step D and perform the update again in step E.
If the version is 1.21 then the firmware update was successful. The player is now ready for use.
D.O.A wrote:
只要型號對，都可以進行升級。...(恕刪)
回樓上大大... 好像不是這樣耶....
剛剛上去PIONEER的官網.... 他的公告 說...
新聞標題:先鋒公司聲明啟事 ：有關先鋒公司「產品軟體/韌體下載」注意事項聲明
-日期: 2009/01/13
各位先鋒公司產品愛用者您好,
部分Pioneer產品具有韌體/軟體更新功能的彈性設計，如果您想為您的產品進行韌體下載/軟體更新，請於執行產品韌體/軟體下載及安裝前，務必確認以下事項：
1. Pioneer先鋒公司所提供的韌體/軟體，需針對特定機種與特定國家/區域的產品使用。於台灣地區購買；附有「先鋒股份有限公司」保證書的機種，只限採用由台灣先鋒官方所提供的韌體/軟體。因此請勿任意使用其他地區的官網站或逕行採用他人轉寄之韌體/軟體。
台灣先鋒公司官方網站www.pioneer-twn.com.tw
2. 其他國家之Pioneer產品即使型號完全相同, 韌體/軟體內容不保證完全相容，請勿嘗試下載或安裝使用，以免發生功能錯誤或其他產品損害的風險。(例如：所購買的台灣先鋒公司藍光播放機BDP-51FD必須採用由台灣先鋒官方所提供的BDP-51FD韌體, Pioneer其他國家官方網站上的BDP-51FD韌體不保證適用於台灣機種)
台灣先鋒官方網站，目前正在進行韌體/軟體下載頁面製作，完成後即可提供網路下載韌體/軟體功能。若您目前對Pioneer產品韌體/軟體下載有任何問題或需要，請洽先鋒公司客服中心(電話：02-2521-3166)或電子郵件信箱： service@pioneer-twn.com.tw
所以 好像只能等他們 做好網頁.... 要不然 就是請客服人員更新....
73_troop wrote:
回樓上大大... 好...(恕刪)
我之前從網上download各國的1.21版軔體, 都是同一天同一時間compile的, 應該是一樣的東西, 頂多換個名字而已.
不過有個問題順便問一下.
我用的是LX71, 購入時的軔體版本是1.08, 當時賣我的店家有發現港版"Jumper"播起來有馬賽克, 據稱可用新軔體解決, 本站去年底也有些人在討論此事, 且確實1.17版可以解決.
http://www.mobile01.com/topicdetail.php?f=347&t=851907&p=2
爾後我有更新至1.17版, 不過手邊沒片子, 所以沒針對上述問題測試過, 最近把機器更新至1.21版, 並買了一片香港得利發行的"The day after tomorrow", 居然仍出現馬賽克, 但至店家的1.17版LX71播放時, 是正常的.
不知是否有人可以協助測試一下, 是1.21版改壞了, 還是我的機器有問題, 謝謝!
內文搜尋
從 APP 打開
X