［實驗報告］HD-A5 實驗失敗 必須跟大家說再見了
變成磚的［兇案現場］請看這裡
http://electronmania.blogspot.com/2011/12/hd-a5.html
期盼不會有第二個人遭遇此不幸。
park7 wrote:
［實驗報告］HD-A...(恕刪)
別耽心 , 一樣可以救回來
你那個fw 小弟有刷過 , 它會自動重刷兩次
第25樓
http://www.mobile01.com/topicdetail.php?f=347&t=1985624&p=3
Mars bootcode recovery
1. Run a serial console emulator, with Ymodem support (minicom with ltrzsz on
UNIX, hyperterminal on Windows). Set it to 115200 8N1.
2. Power on your unit while maintaining <space> pressed, until you get an
"s/d/g/c>" prompt
3. Type 's', and use Ymodem to send in the relevant settings file for your
device. The mars.mars.QFP.128x1.bin , which should work for most Mars BGA based
units, such as the 1073, even if they have more than 128MB RAM, is
included with this archive.
When the setting file transfer is complete, it should display "hello world!"
and you should get the "s/d/g/c>" prompt back by pressing enter. If not, then
you will need to use a different hw_setting file.
4. Type 'd' and transfer the 'mars.QFP.128x1.bin' in the same manner
5. Type 'g' to run the executable.
mars.QFP.128x1.bin 檔案在
http://xtreamerdev.googlecode.com/files/mars-hw-register-settings.zip
灌完 mars.QFP.128x1.bin 再刷 bootcode 就ok了
bootcode隨便刷一版就行了
內文搜尋
從 APP 打開
X