IamGreener wrote:
用過那麼多輪組，發現...(恕刪)
沒錯!我也是花錢學到的
畢竟騎沒有多久就產生偏擺,需要送校所花的時間就很不划算了,而且還生一肚子氣
Deep V
Dyad
Fusion
Spartacus Pro
Uriel
Nuvian
Razor
The Helios
The Helios features the Aerohead and Aerohead O/C rims, but uses special lightweight hubs and upgraded spokes. The Ti Grey Velocity sealed bearing hubs are laced to black Sapim CX-Ray bladed spokes and silver alloy nipples to create the ultimate performance wheelset. The Helios comes with a 24 spoke radial laced front and a 28 spoke 3 cross rear and is either Shimano or Campagnolo compatible. We think it looks best with our Ti Grey rims, but we do have other colors available.
700c
24 spoke radial laced front
28 spoke O/C rear, 3 cross
Weight
Front – 600g
Rear – 780g
Black Helios Set
Wheel Set Weights:
700c
24 spoke radial laced front
28 spoke O/C rear, 3 cross
Front – 600g
Rear – 780g
The Helios Wheelset is only available in a 24h front and 28h rear combo. However if you want to go with our standard Velocity hubs you can upgrade to Sapim CX-Ray spokes and shave close to 2 grams per spoke!
Rim Specs:
Aerohead Standard
Diameter/BSD
Drillings ERD Width Weight Colors MSW NON
16" (349)
28h
333
20mm
234g
Black
X
X
20" (406)
28h
374
20mm
268g
Black
X
24" (520)
24h, 28h, 32h, 36h
498
20mm
356g
Black
X
26"
32h
542
20mm
366g
Black
X
650c (571)
24h, 28h, 32h,
554
20mm
374g
Black
X
700c (622)
18h, 20h, 24h, 28h, 32h, 36h
602
20mm
416g
Black, Silver
X
700c (622)
28, 32h, 36h
602
20mm
416g
Black, Silver, White, Elec. Red, Yellow, Elec. Blue, Purple, Gold, Orange, Lime Green, Ti. Grey, Bright Silver, Pink, Celeste X
32h only black, bright silver, gold, white, red, yellow, blue, orange, purple, lime green, ti grey, pink
Aerohead O/C
Diameter/BSD
Drillings
ERD
Width
Weight Colors MSW NON
650c (571)
28h, 32h
550
20mm
374g
Black
X
700c (622)
24h, 28h, 32h, 36h
598
20mm
404g
Black
X
Black only 28h, 32h, 36h
Hub Specs: We build all our wheels custom and to order so the possibilities are endless, but here's a couple of possibilities for your wheelbuild.
Helios Hub:
Front: Weight: 70g
100mm
Drillings:
24h Only!
Bearings:
Cartridge Sealed
2 -RS699
Rear: Weight: 214g
130mm
Drillings:
28h Only!
Shim./Campy
Bearings:
Cartridge Sealed
2- 6803-2RS
2- 6803RS
給大家看看
,雖然我看不懂內容
.但FRONT 600g REAR 780g這我還看的懂
m2263 wrote:
很好的分享.何不多加...(恕刪)
對一般消費者而言
編法可能比較沒有實質的參考意義
反而是編法後產生的視覺美感(例如 g3編法就很多人喜歡)還比較多人在意
編法跟實質上強度的好壞與花鼓設計也是密不可分
這部分不要說消費者，連大多數的店家都不見的有資格評論這部分
至於編法外型部分有照片可供參考就足夠了
售價部分
我想應該沒必要
有興趣的自己會去找店家/找網路
若硬要去區分店家或車友的文章，
店家的就是廣告文
車友的就是分享文
也不管內文/拍照是否用心與否
這樣非黑即白的審查角度
請按上一頁即可!
感謝
有心分享得車友
也請盡量將格式統一
比較容易讓後進看得懂!!
(以下分享直接複製修改即可)
整組重量(不含內襯+快拆):
鋁框規格(孔數/材質/框高):
幅條規格(材質):
花鼓規格(材質):
培林規格(種類/數量):
認證:
限重:
使用心得:
我第一台公路車.第一次爬山時是騎內湖金龍產業道路.所用輪組是09年跑0
當時只覺得這段原本小徑車常在騎的路.變的好硬
不過跑0剛性跟順暢度真的很好..
後來換上 義大利 小板輪 GIPIEMME TECNO 1.55 Light Clincher-700C
重量 1460
這組不是很有名的輪組..又輕又硬..花鼓也非常順暢..陪我到處爬坡..但是我腳力算還好
在連續陡坡的變態山路時..小版的很累..雖然下坡很爽
所以在前天換了
700c Novatec Sprint
重量 1377
雖然2組重量差異並不大..但是這組久裕框高只有 24
起步比原本快..重檔騎踩踏感也比較輕鬆
今天下午睡過頭 沒去試山路..明天騎完在來更新一下
不過很明顯新換的這組剛性比較差.平路就可以感受到
不過以這價位也沒啥好挑...
重踩練習.間歇練習..計時練習.飛輪練習.練對方法才會進步
內文搜尋
從 APP 打開
X