dnalvqrq wrote:
量鎖骨寬不是好辦法
我量起來大約35cm
但實際上我用5630的成車，尺吋M
他配400mm就是一般成本標準配備
實際用起來過小，後來組車改成440mm
不過現在發現可能420mm才是剛好的…
不過也只差一點點，但量鎖骨寬350mm
就是你說肩鋒，那還是差7公分距離…
這樣說明也不是很完全
請看Choosing the Right Handlebar Width
1. For road handlebars, have somebody measure the distance between the "points" on the front of your shoulders.
(不是你量衣服時用的"肩寬")
2. There's no set standard on how road handlebars are measured. 各廠商有自己的量法
3. Most are measured from the center of one drop* to the center of the other. For center to center, simply add 2cm to your shoulder measurement to find the right size--so if the points of your shoulders are 40cm, you want a 42cm handlebar.
(* Fuji原廠的附的把手則是量上把. 注意有些上把寬與下把寬會有差到兩公分)
4. For the outside edge to the outside edge of each side of the handlebar, you add 4cm--so a 44cm bar would fit 40cm shoulders.
內文搜尋
從 APP 打開
X