• 3

[求助]使用Slot1 雙CPU 主機...

P3 的雙CPU 應該有使用INTEL 440BX 或是 via 694D (還有一款 可以插 DDR 的,型號忘了)
比較舊的才需要 TERMINAL 吧.

via 694D 好像是不用,最少我用的版子是不用(但是一定要插在特定的socket)
開機的速度會很慢嗎?
因為有遇過 CPU 的快取記憶體在不啟動的狀態下,光進入 XP 畫面也要 4 ~ 5 分鐘,
啟動 CPU 快取記憶體後開機好像縮短至 1 分鐘以內就可以進入,
Ps: CPU 也同樣是 PIII 等級的。
有人的地方就有恩怨,有恩怨的地方就有江湖。
If your problem only occurs after installation, It could be your harddisc problem(since you had replaced your memory). Try to use a IDE harddisc.
What is the error number on your BSOD(blue screen of death)?
You may find clue in that number or the system error log.
PS:
Here is a review of your motherboard which mentioned some problems:
http://www.geocities.com/ResearchTriangle/Campus/9943/kp6bs.html
POWER AND 主機板拆開看一下電容有沒有暴,之後直接拿一顆好的POWER來TEST比較快知道問題。
^^a真抱歉很久才回...
其實開機速度並不慢耶...

很快就可以進入WinXP
Have you tried another VGA card? Some AGP only can run 2X mode... Since you use in server, try to find another AGP 2x VGA card, or just use PCI VGA card.

Another thing you can try is just to use a IDE harddrive (small size is better like 20, 30 40 GB), seems your motherboard is old, bigger than 120G might have problem.

And, go to the bios, reset all setting to default.

Hope these can hope you!

  • 3
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?