艾瑞克0706 wrote:
顯然這個問題在製造端還未有效解決....
CX-5. MAZDA 6 維修手冊都寫得很清楚啊!
馬廠就做一下，不要推拖拉!自己看書做，不要搞到沒商譽，車主失去信心!
甚麼日本職人精神?人馬一體?
怎到台灣都不見了，再這下去100年變"嵩壽"?(求好心切)
參考一下:
"6. Rock the vehicle, and verify that the shock absorber operates properly.
7. Measure height H from the center of the wheel to the fender brim."
8. Verify that the difference between the left and right dimension H is within the specification.
If it exceeds the specification, repeat the Step 2—7.(再檢查所有的底盤、避震器....等)
Standard specification
10 mm {0.39 in} or less
檢查避震器如下:(以後面為例)
1. Remove the rear shock absorber.
2. Inspect for damage and oil leakage.
3. Compress and extend the shock piston at least three times. Verify that the operational force does not change and that there is no unusual noise.
If not as specified, replace the rear shock absorber.
內文搜尋
從 APP 打開
X