Monia wrote:
而CX-5後車箱開啟行駛限制功能...
小弟的 2016 CX-5 2 驅柴試過了，這功能可用。
當車的檔位在處在 D 或 N 檔時，後車門的電磁閥鎖是失效的。(意即怎麼按後車門都不會開，沒試 R 檔)
唯有當打回 P 檔時，後車門才能開啟。
目前還是先改回原設定，就是任何檔位都能開啟，因為有次老婆下車去拿東西，俺坐在駕駛座，一時未察踩在 D 檔，
老婆開後車門開到火大
。這時小的才發現...趕緊打入 P 檔。事後跟老婆乎巄說這是安全連動...
7B7-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = 0 - no auto door lock or 1 - auto door lock (activates door lock function in RBCM)
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - 1x blinker when doors close from remote control or 1 - no blinker when doors close from remote control
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = 0 - no blinker when doors open from remote control or 1 - 3x blinker when doors open from remote control (w/alarm system)
b0 - 0 or 1 = function is not known
B4 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when Ignition ON) tested on CX5
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when doors open) tested on CX5
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known
ability to lock doors when Ignition ON tested on CX5
請問有沒有人改這個?這個我改不出來(失敗)
johnlee.tw wrote:
ability to lock doors when Ignition ON
已經找出 5 個速控鎖的選項，這是指第 6 個嗎 (引擎發動前即鎖門)?
只是在改 MZD 的參數時，不都是要到 IGN 狀態，再以 ELM327、ForScan 連接，
若此時要車門鎖啟動...個人覺得有點怪怪的。
內文搜尋
從 APP 打開
X