• 177

[分享] 魂動 Mazda 解除原廠隱藏功能分享與討論

hosw大您好, 方便分享一下您是怎麼調校 HUD嗎? 尤其是白天大太陽下HUD亮度自動拉到最大時, 如何讓讓鬼影降低或消失的密技, 我的一位工研院朋友也想跟您請益, 也同時造福想改裝的車友, 感謝啦 !!!


這是您陰天時段拍攝的, 鬼影真的不太明顯, 可否分享一下大太陽下的情況, 感謝啦



這是2019年式原裝HUD大太陽下的投影(沒貼隔熱紙), 目視還有一點點糊糊的鬼影, 但手機拍攝下就完全沒鬼影了


這是CX5社群版主先鋒最早換投影式 HUD的分享, 黃昏時段, 也是有鬼影, 大白天時段狀況會更嚴重跟我一樣



hosw wrote:




joewang2003 wrote:
完全正確, Wedg...(恕刪)

如果像上一代X-trail,
在前檔玻璃投影區,
貼塊深色隔熱紙,
是否能解決這問題?

johnlee.tw wrote:
這個表應該無法改,因為他無法顯示LIM...(恕刪)


瞭解,真是殘念....
感恩
攝影 ‧ 就是在平凡中尋找不平凡 ‧ 瓶攝言語
greatsteve大, 沒錯換低透光率的隔熱紙(50 or 40以下可以降低日間至少50% 或夜間至少70% 前擋外層的鬼影反射, 但就要付出夜間駕駛的安全風險, 而且達不到90% 降低 (光學投射式原廠HUD不貼隔紙下的低標)


greatsteve1201 wrote:
如果像上一代X-tr...(恕刪)
joewang2003 wrote:
greatsteve...(恕刪)

你誤會我的說法,
我是指只在投影區,
而非全部前檔。
瞭解勒,局部貼HUD反光膜是售後市廠aftermarket非置中加裝品唯一的選擇,但對高價的原廠件driver sight 置中設計是無法如此做的,因爲會造成 driver distraction, 撇除美觀性及不適感,光是在北美就無法過安全法規



greatsteve1201 wrote:

你誤會我的說法,
...(恕刪)
新版的Forscan 2.3.16 出來了, 2019 CX5 解速控有望了

https://forscan.org/download.html


Changes History
+ Added feature
* Improved/changed feature
- Bug fixed/removed feature
2.3.16 beta, 2018-07-04 (download)

+ Vehicle database update
+ Ability to export and import vehicle profiles
+ Configuration and programming procedure RVM/BSM "Module initialization/relearn vehicle data" for:

Mazda SKYACTIV
+ Configuration and Programming function "PCM Vechile ID block configuration" for certain PCMs (test mode!)
+ Service function "PATS Programming"for:
Lincoln Mark VIII 1997-1998 model years
+ Service procedure "DPF Static Regeneration" for:
Ecosport 1.4/1.5 TDCi Stage V/Stage VI 2012/2014/2018 model years
Fiesta 1.5/1.6 TDCi Stage V 2013 model year
F-Series Super Duty (platform P473) 6.7 Powerstroke 2017-2018 model year
Transit Connect 1.6 TDCi Stage V 2014 model year
Transit Courier 1.5/1.6 TDCi Stage V 2014 model year
+ Service procedure "Reset Differential Pressure Sensor Learned Values" for:
F-Series Super Duty (platform P473) 6.7 Powerstroke 2017-2018 model year
Transit (North America) 2015-2018 model years
+ Some configuration parameters
+ Support for HSWM module (aftermarket) for:
Expedition 2017 model year
+ Service function "Crash Flag Reset" for BCMii module of:
C-Max (EU) 2015 model year
+ Service function "Calibrate Cruise Control Sensors" for CCM module of:
Edge 2011-2012 model years
Explorer 2011-2013 model years
Focus Mk3.5 (EU) 2015 model year
Kuga Mk2 (EU) 2013 model year
Taurus 2010-2013 model years
Transit 2013 model year
Transit Connect 2014 model year
Lincoln MKS 2009-2013 model years
Lincoln MKT 2010-2013 model years
Lincoln MKX 2011-2013 model years
+ Service function "ABS Service Bleed" for:
Mazda CX-9 (first generation)
+ Service function TCM "Reset All Adaptations" for Mondeo Mk3 with JATCO transmission
+ Service procedures "Reset MAF Sensor Adaptation" for:
Focus Mk3.5 1.5 TDCi Stage VI 2015 model year
Transit Connect 1.5 TDCi Stage VI 2014 model year
+ Service function "Reset the High Pressure Fuel System Learned Values" for:
Focus Mk3.5 1.5/2.0 TDCi Stage V/Stage VI 2015 model year
Ka/Figo 1.5 DV5D 2015 model year
Kuga Mk2 2.0 TDCi DW10F Stage V/Stage VI 2013 model year
Mondeo Mk5 1.6 TDCi Stage V 2015 model year
Transit Connect 1.5 TDCi Stage VI 2014 model year
* fixes and improvements in Output Control function
- unability to write to RCM Focus Mk3/3.5 (EU)
- Critical bug that allowed to change Central Configuration parameters in a wrong way (without right checksum calculation) on some models, that may cause a "brick" of vehicles with RFA (keyless) ignition
- bug with timeout in service function "Enter Electric Parking Brake Maintenance Mode" and "Exit Electric Parking Brake Maintenance Mode"
- incorrect loading vehicle profile in offline mode for some models
- content bug in in service function "Remote Keyless Entry Programming" for Focus/C-Max Mk2.5

自問自答, 一個安裝正確的HUD並搭配對應規格的前擋,就算不貼隔熱紙,也不應有鬼影 如下






joewang2003 wrote:
hosw大您好, 方...(恕刪)
小弟的車是CX5二代2019年式
速控跟尋車音都已經改成功沒有問題

卡在SCBS-R跟DAA
我的原始如下:
720-04-01: 1D20 0080 FFE8
720-04-16: 4400 2400 06AF

改成下面:
720-04-01: 2046 0080 FF11
720-04-16: C400 4400 0750

但還是在寫入的時候出現錯誤
不知是否是算的有錯?

另外
在處理IC這塊的時候
他會從MS mode叫你切回HS mode才能讀寫是否正常呢?
再麻煩各位大神幫忙一下了
感激不盡~~~

您的原始如下:
720-04-01: 1D20 0080 FFE8
720-04-16: 4400 2400 06AF

要改成下面:
720-04-01: 1D81 0080 FF49
720-04-16: 8400 4400 0710


--------------------------------------------------
另外
在處理IC這塊的時候
他會從MS mode叫你切回HS mode才能讀寫是否正常呢? ====> Instrument Cluster控制相關都一定跑 HighSpeed CAN Bus, 照著Forscan instruction 做就對了



ggooder wrote:
我的原始如下:
720-04-01: 1D20 0080 FFE8
720-04-16: 4400 2400 06AF

改成下面:
720-04-01: 2046 0080 FF11
720-04-16: C400 4400 0750
  • 177
內文搜尋
X
評分
評分
複製連結
請輸入您要前往的頁數(1 ~ 177)
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?