請問一下目前1係列和3係列,交的車一樣有生鏽嗎!

請問一下目前1係列和3係列,交的車一樣有生鏽嗎?因為想看320d,可是又怕買來交車以後是生鏽的車。
2012-11-03 16:20 發佈
文章關鍵字 係列
目前有生鏽的車,總代理會幫您除鏽(噴黑漆)
但看不到的地方不會主動幫您處理。

十月分去展場看到的新車都仍有生鏽的情況,
十一月應該都還是六、七月生產的車子。

請等到明年式樣的,比較有機會不再有生鏽的情形。



annnny200002 wrote:
請問一下目前1係列和...(恕刪)

1218nick wrote:
目前有生鏽的車,總代...(恕刪)

現在新車在交車中心 總代理就會直接處理座椅底下的生鏽
如何處理不清楚 看來就是噴了一層黑漆 看似漂亮 但能撐多久不清楚
車友原擔心拆解座椅後會有異音產生 不過個人開了兩天目前是還沒啥狀況出現
其實就目前的狀況 除非原廠一聲令下 進行全面的招回與鈑件甚至座椅更新
總代理能做的就是這樣而已 不可能自己有多大動作


flac wrote:
現在新車在交車中心 ...(恕刪)



基本上要牽車(交車)前就是在合約上特別註明一下條文(關於生鏽方面的未來發生情況解決方案的保證)
這樣子應該也比較能得到相對的保障了吧..

因為我在猜...這個可能是因為材料用料的問題所產生的..感覺他們要全面招回的機率很低..可能都是個別個案處理掉吧.....但是大家的權益還是一定要努力去爭取的...因為我們是花錢的消費者...沒道理去承受工廠自己搞品變的後果.

jay-shih wrote:
..感覺他們要全面招回的機率很低..可能都是個別個案處理掉吧.....


連原本申請集會遊行抗議的都臨時改時間取消了
所以被摸頭的機會常大...

剩下的自求多福吧....
這種抗議是要溫和持久的,就算一次集會結束我也不認為泛德能有什麼作為。

只能不停的跟上別國的進度就不錯了。

看福斯汽車也是經過一年才終於低頭買單。

車友請支持生鏽車隊,繼續動員。

當然也有業代上來規勸大家放棄。

這點就看大家的耐力是否持續。

我個人是不會被摸頭,也不會放棄車隊中的所有車友 。


有好康的,我一定會努力爭取給大家。

也希望大家不要吝於支援喔 感恩 !

dammm wrote:
連原本申請集會遊行抗...(恕刪)
感謝NICK的無私幫忙.一定會一直支持下去...

1218nick wrote:
"這種抗議是要溫和持久...(恕刪)



"這種抗議是要溫和持久的",這是蠻正確的一個作法,基本上就是有問題就盡快處理,該爭取的權益就該努力去爭取,這是必然的.至於怎樣子摸頭怎樣子完善,這都只是處理事情的某一方面的過程而已,產品最終還是要回歸市場面,該換的就要換,有問題的產品就該處理完善,事情就是"針對事情"處理,也無須無限上綱,所以還是好好的談要如何解決問題比較實在.
國外的網友說 11月底以後生產的車會解決這個問題
而目前有這樣問題的車 則是會更換已經烤過漆的零件

http://www.babybmw.net/viewtopic.php?f=63&t=39989&sid=a0d55f39ebe73f26678382d6c7123486&start=120

大陸也是更換座椅:
[导读]预计将于10月中旬为客户更换座椅底部受到腐蚀或生锈的金属部件。敬请留意授权经销商到店更换通知,感谢您对于宝马品牌的关注。
http://auto.qq.com/a/20120921/000337.htm


http://f20.1addicts.com/forums/showthread.php?p=12757314

看起來國外代理商友善的的多 直接建議換座椅...


Response from my Dealer.....................

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx

I have seen this on various models, to a lesser degree some bases show no signs of rust others have small specs or spots .

The seat base on some of our models have a protective wax coating over the raw metal to restrict the possibility of rust.

There are several different handling and manufacturing processes of the seat as well as the vehicle which could lead to the wax either being rubbed off or the possibility of the base standing in a moist environment.

The rest of the vehicle body has an electrolysis coating which is applied to the metal before the vehicle is painted. The rust is most likely only found on the underpart of the seat.

As this is a component inside the vehicle and not exposed to moisture the risk of rust is very low.

AS I have not inspected your vehicle I cannot comment on its condition but from my experience it is normally superficial surface rust and will not degenerate further.

I would recommend we replace the seat base however the rust could also be wipped clean and a new layer of wax could be applied. I do not believe that there is any other area which is affected as this is the only place that does not have E-coat over it.
內文搜尋
X
評分
評分
複製連結
Mobile01提醒您
您目前瀏覽的是行動版網頁
是否切換到電腦版網頁呢?