po100故障碼_主要是空氣流量計的問題_處理方法如下: The simplest thing to do is to reset the code and see if it comes back. Then start with the cheapest, easiest repair procedures:
1)Verify that the Mass Air Flow Sensor wiring is connected properly and that there are no broken / frayed wires. 2)Unplug and reconnect the MAF wiring harness 3)Check the voltage of the MAF sensor (refer to a repair manual for vehicle specific information) 4)Replace the MAF sensor
po110故障碼_不一定是O/2含氧感知器,也可能是進氣導致空氣流量計的問題: The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).