3a1993 wrote:
有人中文很不好 壓...(恕刪)
既然honda泰國有生產引擎那要不要說明一下是二輪還是四輪引擎?
生產引擎型號也公佈一下?
起碼也聯結一下網址讓大家增廣見聞一下呢?一台WASH可以用個骨董級千古不敗四速變速箱開的想必很爽是吧,
夏天開個冷氣油耗馬上掉到10km/L以下,
還可以自得其樂的人我也少看到了.
誰在敲門 wrote:，
既然honda泰國有...(恕刪)
等你哪麼久回復 我以為有好料讓大家增長見聞結果只等到一堆嘴砲,都沒準備資料嗎?只會嘴砲嗎?有拿點真材實料出來吧?
想看是嗎?懶的去找 是嗎?
純粹嘴砲想不勞而獲是嗎?
沒關係,再敎你一次 再跟你說一次,你好好開你的車開100年都沒有人會兔你槽
但亂說話亂護航在網路上就會有人兔你槽
Honda to Double Automobile Engine Component Production Capacity in Thailand
hatc本田泰國廠
節錄
Business Areas: Production and sales of automobiles
Production of engine components
Automobile Productions: Accord, Civic, City, Jazz, CR-V
翻譯
業務範圍：
生產和銷售的汽車 生產發動機部件
汽車製作：雅閣，思域， 市，爵士，CR - V
我說的很清楚,我從沒讚揚過wish,只是家裡窮,沒錢買更好的車,wish7人座符合我需求懂嗎?
不過我窮的有志氣沒拼命護航 ,不會為了自己開什麼車就把這台車神話 什麼的都是日本製的 嘴砲一堆!
還笑死人的說自己開honda20年了,結果什麼都不懂
wish不是好車懂嗎?
開冷氣10以下的車一大堆本田每台車開冷氣是區可以10以上嗎?(正常開法)
沒知識也要有常識
真理是越辯越明,自己認為什麼是對的就找出證據,不必酸別人開什麼車來突顯自己多行
像你這樣只會被看笑話 開20年本田的車卻都不知道到底車子是怎樣 只憑業務嘴巴來認識本田
你在這樣胡扯下去只是會讓大家知道台本的真相
你的幻想會更加破滅吧了
另外要辯請認真準備資料 不要再天馬行空的嘴泡了
jcpapa wrote:
剛剛看中天新聞報導 ...(恕刪)
我的英文很蔡,空心蔡
下面我只看到汽缸頭與汽缸本體,
活塞 活塞環呢? crank shaft 呢? 這不屬於引擎Component嗎?
Honda to Double Automobile Engine Component Production Capacity in Thailand
TOKYO, Japan, July 20, 2005–Honda Motor Co., Ltd. today announced plans to double production capacity at the engine plant of Honda Automobile (Thailand) Co., Ltd. (HATC), a Honda automobile production and sales subsidiary in Thailand, from the current 150,000 units annually to 300,000 units in the spring 2006. Total investment for this expansion plan is expected to be approximately 4 billion yen.
Processes conducted at the HATC engine plant currently include molding and machining of the cylinder block and machining of the cylinder head, both key components of an engine. These components are supplied domestically in Thailand as well as to Honda operations in other ASEAN and South West Asian countries. With this plan to double capacity, the plant building will be expanded to accommodate a second machining line and molding processes for the cylinder head to achieve integrated production of the cylinder block and cylinder head.
Moreover, the HATC engine plant began production of cylinder sleeves this month with introduction of a “spin cast” production process that does not require sand casting. Thailand became the third country, after Japan and the U.S., where Honda has introduced this spin cast method.
About Honda Automobile (Thailand) Co., Ltd. (HATC)
Established: December 2000
Capital Investment: 5.46 billion baht
Capitalization Ratio: 75.94% Honda Motor Co., Ltd.
15.42% Asian Honda Motor Co., Ltd.
8.64% Others
Location: Ayutthaya, Thailand
Representative: Hiroshi Toda, President
Employment: Approximately 3,700 associates
Business Areas: Production and sales of automobiles
Production of engine components
Automobile Productions: Accord, Civic, City, Jazz, CR-V
Automobile Production Capacity: 120,000 units / annually
airbus330 wrote:
我的英文很蔡,空心蔡...(恕刪)
我不知道你是在咬文嚼字還是怎樣?
一篇新聞稿需要說明引擎內所有的東西製造流程或是怎麼製造嗎?
羅絲也要泰國製才可以嗎?彈簧也要泰國製才可以嗎?
要不要順便說說裡面的鐵是不是泰國自產的?
標題寫的很清楚了"Honda to Double Automobile Engine Component Production Capacity in Thailand "我想本田知道什麼叫引擎廠,怎麼製造引擎,花了大筆金錢絕對不是在這讓你懷疑引擎是否泰國廠製,台本社長陳俊亮都說是泰國製,找出證據你還在這咬文矯字??到現在還認為自己說的比社長準?
裡面很明顯的提到要提高泰國引擎廠一倍的產能
車型包含crv fit(jazz)city accord
還在強辯什麼?
叫本田社長跟你報告泰國產到底生產什麼東西,裡面所有零件是泰製還是日製還是美製?
是這樣嗎?
內文搜尋
從 APP 打開
X