不知有誰夠專業能夠說明配置DPF的柴莽,機油應該適用哪一種原廠規範?
Ford M2C913-A
Engine oil, Initial and service fill, SAE 5W-30. This specification meets the ILSAC GF-2 and ACEA A1-98 and B1-98 and additional Ford requirements.
Ford M2C913-B
The Ford M2C913-B specification is released in Europe for initial fill engine oils used for lubrication of spark ignition engines using gasoline and for compression ignition engines using diesel fuels. The specification is also used to define engine oils for servicing Ford engines where applicable. The oil shall meet all the requirements of the ILSAC GF-2 and GF-3 specification, the ACEA A1-98 and B1-98 specification and additional Ford requirements.
Ford M2C913-C
Fully backwards compatible and is strongly recommended for all applications that currently require the specification Ford M2C913-B. The new engine oil provides various benefits to the customer such as improved fuel economy benefits and high robustness to biodiesel fuels.
Ford M2C917-A
Viscosity SAE 5W40 engine oil for pump injector diesel engines.
Ford M2C934-A
Extended drain engine oil for vehicles equipped with diesel particulate filter (DPF).
ken9181 wrote:
Ford M2C913-B
The Ford M2C913-B specification is released in Europe for initial fill engine oils used for lubrication of spark ignition engines using gasoline and for compression ignition engines using diesel fuels. The specification is also used to define engine oils for servicing Ford engines where applicable. The oil shall meet all the requirements of the ILSAC GF-2 and GF-3 specification, the ACEA A1-98 and B1-98 specification and additional Ford requirements.
就小弟的認知,車主手冊有說明.
140P(DW10B)的柴莽是 913-B, 163P(DW10C)的應該是 913C,
除非.........印錯....
不過如果跑去 Shell UK 或是 Aral-英文 網站查, 相對應的引擎就是這兩個規範沒錯啦~
===
另外, 這段文字的最後一句話:
and additional Ford requirements.
"其他福特的要求".
也是不能把 A1/B1-98 , A5/B5-08 與 913B/C認證當作一樣的證據之一.
===
對了, A5/B5 或是 C3 這些 "可替代" 的油用起來當然是 "可替代",
但是有些資訊會宣稱, 某 A 油 與同廠牌的 B 油 內容完全一樣,
只是因為: 舊包裝沒用完/市場因素/行銷因素/@$#@$@#E!@$#$^$!@#! 等等等的因素
而沒在 B 油上面標示 A 油有的認證 (例如 A 有 A1/B1/C3, B 只標示 A1/B1)
看到這個就笑笑不要用了吧... 就算內容物真的相同, 要是需要保固可是跟原廠說不清的~
http://www.gulfoilltd.com/cms_media/files/orangr_disk_22_book_proof.pdf
重點節錄如下:
WSS M2C913-B Suitable for use in all older vehicles (petrol and diesel).
Ford dealers were informed in 2009 to use oils meeting WSS M2C913-C.
個人翻譯如下
913B 認證的油品適合比較舊的車輛(汽柴油均可)
2009年福特經銷商被通知, 應該改用 913C 認證的油品.
內文搜尋
從 APP 打開
X