好快！GRDⅢ不是才剛上市沒多久？
請自行參照：Ricoh Global官方網站。
chinav wrote:
有人可以說明一下升級...(恕刪)
新購買的GRD3，先確認目前韌體是否為最新版，再決定是否昇級
方法為：在未開機時，同時按著「向下鍵」和「播放鍵」，如下圖
LCD會顯示相機目前的韌體版本、快門數等..相關資訊
-----------------
GRD3升級方法：
1.將電腦下載執行後，在資料夾Firmware rel 內的兩個檔案，Copy到你的SD卡最上層(不要放到資料夾內)
2.將SD卡拔出電腦，插回GRD3，裝上還有一半電量以上的電池
3.記得，不要開機
4.先按住圖下第一個鈕，再同時按第二個鈕 (按鈕的順序有差)
5.接著依照螢幕指示升級完成
詳細升級中文(簡體)說明在：http://www.ricoh.com/r_dc/download/firmware/docs/grd3_fwup_cs.pdf
Modified the following phenomena.
1 With the combination of the following conditions, it will not properly appear the image in the position display window that is shown when you playback with enlarged.
- [Auto Rotate] ON
- Rotate the camera to the lengthwise direction
- Playback the picture that was captured in the lengthwise direction and with [3:2] or [1:1] in the image size
2 Set the focus to [MF] (Manual focus) and turn the power off, and then turn the power on again, the focus distance will become infinity.
3 In Manual focus, if you enlarge the center part of the image in the screen, the enlarged part may become black-out rarely.
4 With attaching the GW-2 (wide conversion lens), there may be rare occasions that information on the focus distance in Exif will not be recorded correctly (Correctly, which should be recorded as 21mm; 35 mm filmcameras equivalent).
5 In taking pictures by switching between macro mode and normal mode, the resolution in surrounding parts (four corners) may change.
是本來就已經盡善盡美了嗎?這個更新好像沒有什麼重大變化~~~
不過，既然有就還是更新一下好了~~~~~
內文搜尋
從 APP 打開
X