An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.
Note: Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in the SETUP MENU.
Fixed the following issues:
Incorrect distances were shown in the camera playback info display for photographs taken with an optional flash unit in distance-priority manual (GN) mode.
The brightness of the live view photography display would not change when a command dial was rotated to adjust exposure compensation with On (Auto reset) selected for b Metering/exposure > b4 Easy exposure compensation > Easy exposure compensation in the CUSTOM SETTING MENU.
Although the preview button would stop the lens down to maximum aperture when assigned the Preview role, the maximum aperture indicator would not appear in the monitor.
In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
The shutter speed, aperture, and ISO sensitivity displayed in the monitor during movie live view would differ from values in the final movie file.
Volume could sometimes not be adjusted if movies were played with indicators hidden during full-frame playback (None (image only)).
Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the SHOOTING MENU.
If On was selected for Exposure smoothing during interval timer photography, every frame after the first would be overexposed.
File numbers were not assigned in the proper sequence.
In some languages, characters or parts of characters would be missing from the SETUP MENU > Location data > Position display.
In some languages, characters or parts of characters would be missing from the SETUP MENU > AF fine-tune > List saved values display.
Some help text has been changed.
變化從“C”固件版本1.02至1.10
外部錄製控制選項已被添加到設置菜單中的HDMI項目。如果相機通過HDMI連接至支持ATOMOS開放協議（該ATOMOS代將軍NINJA2，或NINJA BLADE）第三方刻錄機，選擇在允許使用相機的控制開始和停止錄製。更多信息可在補充手冊。
注：選擇在設置菜單的HDMI>輸出分辨率的選項比576P（逐行掃描）或480P（逐行掃描）等。
修正了以下問題：
不正確的距離被顯示在相機的播放信息顯示與可選的閃光燈在距離優先手動（GN）模式下拍攝的照片。
當一個指令撥盤被旋轉來調整與在曝光補償實時取景拍攝顯示屏的亮度不會改變（自動復位）選擇對B測光/曝光> b4簡易曝光補償>在自定義設置菜單簡易曝光補償。
雖然預覽按鈕會時分配的預覽作用下停止鏡頭最大光圈，最大光圈指示將不會出現在顯示屏上。
在極少數情況下，快門就不會當用戶試圖採取在短片實時取景的照片發布。
靜態約4秒可以聽到聲音在電影現場查看記錄與外部HDMI記錄器。
快門速度，光圈和ISO在短片實時取景顯示屏中顯示的敏感性將在最後的電影文件不同的值。
量能，如果電影是打了指標全屏播放過程中隱藏有時不作調整（無（僅圖像））。
曝光補償將無法產生預期的結果，如果當NEF（RAW）影像使用潤飾菜單中的NEF（RAW）處理選項進行了處理負值被選中。
在極少數情況下圖像將無法與HDR（高動態範圍）在拍攝菜單中選擇正確記錄。
如果在入選曝光間隔定時拍攝過程平滑，後的第一個每一幀會被過度曝光。
文件編號都沒有以正確的順序分配。
在某些語言中，字符的字符或部件會錯過從設置菜單>的位置數據>位置顯示。
在某些語言中，字符的字符或部件將在設置菜單中缺少> AF微調>列表保存的值顯示。
一些幫助文本已更改。
