http://answers.nikonusa.com/answers/7022/product/2168/nikon-pc-e-nikkor-24mm-f-3-5d-ed-questions-answers/questions.htm?expandquestion=648244
又有消息說可以
http://www.megapixel.co.il/english/archive/28747
到底誰說得對呢?
試用過D800的前面幾樓大哥,D800的內閃突出程度真的有超過D700,造成移軸鏡可能無法正常使用的情況嗎?
前幾天才去相機店下訂,現在看到這些消息,不知道該相信哪一方的訊息才好。
zamkao wrote:
看望網路上的消息:[...(恕刪)
無法直接連結,請複製下列連結去官網了解一下:
http://www.nikon.com.hk/tc_HK/product_details.page?DCRPath=templatedata/tc_HK/saleable_product_information/data/Digital SLR Cameras/D800.xml¤tProductTab=2¤tProductLink=6&CategoryID=gp11zkve
意思應該是用移焦鏡時,"相機的曝光測光和閃光燈控制系統無法正常工作",而需要手動調整修正。
zamkao wrote:
看望網路上的消息:[PC-E 24/3.5無法使用移軸及傾斜功能]!!!
http://answers.nikonusa.com/answers/7022/product/2168/nikon-pc-e-nikkor-24mm-f-3-5d-ed-questions-answers/questions.htm?expandquestion=648244
又有消息說可以
http://www.megapixel.co.il/english/archive/28747
到底誰說得對呢?
試用過D800的前面幾樓大哥,D800的內閃突出程度真的有超過D700,造成移軸鏡可能無法正常使用的情況嗎?
前幾天才去相機店下訂,現在看到這些消息,不知道該相信哪一方的訊息才好。
這其實已經傳了一陣子了. 他的回答是 "Can not be used with shifting or tilting."
但是你可以看一下這邊的D800鏡頭相容性列表
http://imaging.nikon.com/lineup/dslr/d800/compatibility02.htm
上面寫著PC-E NIKKOR series => 5. Can not be used with shifting or tilting.
再看看另外幾台,如D300S ,D3S
http://imaging.nikon.com/lineup/dslr/d300s/compatibility.htm
http://imaging.nikon.com/lineup/dslr/d3s/compatibility.htm
你會發現同樣的結果, 都寫著 "寫著PC-E NIKKOR series => 5. Can not be used with
shifting or tilting."
D700說明書也是這麼寫的

那以前怎麼沒人問, D3S跟D300S, D700能不能支援PC-E鏡?
至於D700, 我用24移軸跟副廠移軸平移到最上方就快卡到了. 只能移回來再旋轉.

D800的sample裡也有用45移軸照的阿.

2sc wrote:
無法直接連結,請複製...(恕刪)

圖書館這sample就是使用24移軸拍的
http://imaging.nikon.com/lineup/microsite/d800/architecture/on-assignment/
http://imaging.nikon.com/lineup/microsite/d800/architecture/
作者也有提到. 用PC-E跟live view拍攝.
I shot this in live view photography mode using the PC-E NIKKOR 24mm f/3.5D ED. Manual focus operation was more precise because I could visually confirm the focus by magnifying the image on a large LCD beforehand.
zamkao wrote:
簡言之,D800可以...(恕刪)
厚!
Z兄:
不是啦!
簡單講,當PC-E鏡頭在執行移軸或搖擺動作,本身機身測光系統,測距器都無法使用,因為整個平面就已經偏離掉。
Can not be used with shifting or tilting=>(被動語句),如果您使用移軸 搖擺動作,機身就無法提供測光 與測距等支援。(在對焦M(測距),曝光或測光模式下面都標示的意思)
(像M模式,本來機身是會提供一個參考的曝光值與測距功能,當您使用移軸時候,這個曝光參考也失去正常運作。因為不管是TTL或測距,本身是需要和光軸一致才可以正確達到AF SENSOR或RGB METERING SONSOR,也就是因為偏離所以才可以產生一些特別修正。)
並不是無法使用移軸或搖擺!
內文搜尋

X