D7000 1.02軔體發表更新（更新中文版）

歐洲版本


中文版下載


更新內容

1.Noise reduction processing is now performed with shutter speeds slower than 1 s (previously 8 s) when On is selected for Long Exp. NR in order to reduce the bright spots that occur with shooting still images at slow shutter speeds.

當為長時間曝光"NR"選擇"開"，以減少在低速快門下拍攝靜態影像所出現的光斑時，現在可以使用略慢於1秒（原來是8秒）的快門速度進行降噪處理。



2.An issue that prevented the opening of movies recorded with the D7000 in certain movie editing software applications has been resolved.

在一些短片編輯軟體應用程式中無法打開用D7000錄製的短片，此問題已得到解決。



3.When the camera was connected to a television via the A/V cable and a movie was played back, playback was normal the first time but when the movie was played two or more times, the sound was played back at extremely low volume and seemed to play intermittently. This issue has been resolved.

當相機透過A/V線連接到電視機並播放短片時，第一次播放時正常，但兩次或多次播放短片時，播放時的音量極小並且畫面似乎不連貫。此問題已得到解決。



4.When white balance for RAW images created using the camera’s image overlay function was fine tuned with Capture NX 2 or ViewNX 2, the images acquired a magenta cast. This issue has been resolved.

對於用相機影像覆蓋功能創建的RAW影像，如果用Capture NX 2或ViewNX 2精心調整其白平衡，影像將出現紫紅色投影。此問題已得到解決。




5.An issue that caused 0.00” to be displayed for heading information when the GP-1 GPS unit was connected to the camera has been resolved so that —.– is now displayed.

當GP-1 GPS設備連接到相機時，標題資訊顯示±0.00"的問題已得到解決，現在會顯示---.--。




6.When Viewfinder virtual horizon was the role assigned to the Fn button or the preview button and the applicable button was pressed, errors in the virtual horizon indicator were displayed. This issue has been resolved.

當取景窗虛擬水準作為指派給Fn按鈕或預覽按鈕的角色，並且按下適當按鈕時，虛擬水準指示器中顯示錯誤。此問題已得到解決。


7.The following errors in Help displays have been resolved:
“Maximum sensitivity” help was displayed for shooting menu>ISO sensitivity settings>On or Off help.
German help displayed “Select focus priority for AF-S mode.” for Custom Settings>a1: AF-C priority selection help

"説明"中顯示的以下錯誤已得到解決。
對"拍攝功能表>ISO感光度設置>開或關"説明顯示"最大感光度"説明。
"自訂設置>a1: AF-C優先選擇"説明的德文説明顯示"為AF-S模式選擇對焦優先"。