Firmware Version 1.0.5 incorporates the following fixes:
•Improves AF accuracy when used in combination with the EF 16-35mm f/2.8L USM lens or EF-S 17-55mm f/2.8 IS USM lens.
•Fixes a phenomenon in which, in very rare cases, the “Peripheral illumination correction” is applied inconsistently.
•Fixes a phenomenon in which, while performing an EF lens firmware update, the progress bar displayed on the LCD monitor may freeze at 100% even though the update has been completed.
•Fixes a processing error in relation to the leap second for the “Geotag information appended to image” and “Log data” GPS functions.
•Fixes a phenomenon, where at the time of shooting in very rare cases “Err 70” occurs, or the shutter does not release.
Firmware Version 1.0.5 is for cameras with firmware up to Version 1.0.4 If the camera’s firmware is already Version 1.0.5, it is not necessary to update the firmware.
http://www.canon-europe.com/support/consumer_products/products/cameras/digital_slr/eos_7d_mark_ii.aspx?type=firmware
WilliamChuang wrote:
台灣佳能的網頁有說...(恕刪)
詳細資訊
韌體 1.0.5 版包含以下修正和優化︰
1. 優化了與 EF 16-35mm f/2.8L USM 鏡頭或 EF-S 17-55mm f/2.8 IS USM 鏡頭配合使用時的自動對焦精度。
2. 修正了在罕見情況下，不一致地應用「周邊亮度校正」的現象。
3. 修正了執行 EF 鏡頭韌體更新時，即使更新已完成，顯示於液晶螢幕的進度列可能仍停止在 100% 的現象。
4. 修正了與「地理位置標籤資訊已加入影像」及「記錄資料」 GPS 功能的閏秒有關的處理錯誤。
5. 修正了拍攝時在罕見情況下「Err 70」的發生或沒有釋放快門的現象。
1和5我都遇到了...
而且都是使用EF 16-35mm f/2.8L II USM才會出現...
用35L 24-105L 小白兔都沒出現過...
內文搜尋
從 APP 打開
X