basic wrote:
升級後感覺很不錯喔...
感覺對焦明顯變快了..
尤其是暗部對焦..
難道這就是傳說的,
用了之後就長高了,
考試都考100分
This firmware includes the following improvements and fixes:
1. Fixes a phenomenon in which AEB (Auto Exposure Bracketing) shooting does not operate normally under these conditions.
When using AEB together with exposure compensation, the camera may fail to write the third shot to the SD card..
2. Fixes a phenomenon in which the Live View exposure simulation warning indication does not properly display during Live View shooting.
Fixes a phenomenon in which the Live View exposure simulation warning indication, in which <Exp.SIM> would normally flash when the image is not being displayed at a suitable brightness level (under the conditions of low brightness and high brightness), does not display properly during Live View shootring..
3. Fixes a phenomenon in which images cannot be played back after continuous shooting when a printer is connected to the camera or the video output terminal is used.
How do I check the camera's current firmware version number?
screenTurn the Power Switch <ON>, and press the <MENU> button to display the menu. Press the Cross keys, and you will see the "Firmware Ver.X.X.X" at the end of the settings shown in yellow, which is the currently installed firmware version number.
Note: Select
mode (or one of the other creative modes). The version of the firmware will not appear in the basic modes.
How do I update the firmware?
These are two ways to update the camera's firmware.
1. Download the firmware file from this web site and install the update as shown in the updating procedure.
2. Bring the camera to a Canon Service Center and have the firmware updated by the center.
If you choose the latter method, contact a Canon Service Center in your region.
Do I need any special equipment to update the firmware?
The equipment required is as follows.
(1-A) Battery Pack LP-E5 (The battery pack must be fully charged.)
(1-B) AC Adapter Kit ACK-E5 (sold separately)
(2) SD card (64MB or more, 2GB or less)
In order to supply power to the camera, either (1-A) or (1-B) is necessary.
How do I copy the downloaded firmware file to the SD card?
Two methods of copying the downloaded firmware file are provided.
1. If you have a SD card reader, please copy the firmware file to the SD card via a SD card reader.
2. Please connect the camera and a personal computer with a USB cable, and copy the firmware file onto the SD card in the camera. Please use EOS Utitlity application bundled with the camera to copy the file.
http://web.canon.jp/imaging/eosd/firm-e/eosdigital4/firmware.html
歡迎蒞臨文森的生活點滴~~
內文搜尋
從 APP 打開
X