小弟是八月份買的第一批ENVY
最近想更新一下BIOS，於是上了HP官網抓那更新軟體
誰知道每次跑每次當機，一按下start畫面停住一陣子
出現一個視窗顯示我現在版本是F.xx最新版本是F.xx
問我是否要更新後電腦就整個當掉，我連是都沒辦法按
風扇狂轉，滑鼠也不會動按關機也沒用
請問大大這是什麼情形?
Just plug in the USB drive then run the SPnnnnn.exe BIOS file downloaded from the HP support drivers website.
Assuming the USB drive is set up correctly (see below), the BIOS installer sees the HP_TOOLS partition on the USB drive, copies the BIOS and its signature file to the USB drive then runs the winflash installer. The system BIOS detects the USB drive and HP_TOOLS partition and the BIOS is magically updated.
I set up a brand new USB drive as follows:
方法一
1. Delete the HP_TOOLS partition from the hard disk (or rename it to something else)
2. Plug in the USB drive
3. Download and run the BIOS Update Utility (not the BIOS, yet) from the HP support drivers page.
4. Select the option to install on a USB drive
5. Select the option to create the HP_TOOLS partition
6. The drive should now be formatted as HP_TOOLS with a Hewlett-Packard folder containing BIOS and BIOSUpdate folders. The BIOS folder will contain empty Current, New and previous folders.
7. Download and run the HP System Diagnostics (UEFI) SP from the HP support drivers page
8. Select the option to install on a USB drive. This will create a SystemDiags folder under the Hewlett-Packard folder
9. Download and run the HP Notebook System BIOS Update from the HP support drivers page
10 You should end up with an HP_TOOLS partition on the USB drive identical to the one that you deleted from the hard disk.
方法二
1. Download HP Software Framework under software solutions
2. Download HP Diagnostic Utility from their website
3. Download HP BIOS Update Utility from their website
4. Install HP Software Framework
5. Install HP Diagnostic Utility to a FAT 32 formatted USB thumb drive or SD Card (When it asks to create the partition say yes so it will name the drive HP_TOOLS)
6. Install HP BIOS Update Utility to the same FAT 32 formatted USB thumb Drive or SD Card
7. Run Insyde Flash Utility and your computer should reboot.
8. Press enter when the computer asks about updating BIOS
9. Wait until the computer finishes installing, verifying and rebooting and you are done.
內文搜尋
從 APP 打開
X